Journal profile
Tecnologia em Metalurgia Materiais e Mineracao
ISSN 2176-1515 · eISSN 2176-1523 · Associação Brasileira de Metalurgia, Materiais e Mineração · Brazil
FollowGet an email when its zone, impact factor or warning status changes
Tecnologia em Metalurgia Materiais e Mineracao: fully open access; APC about USD 120; review about 12 weeks (community reports); 51 articles in 2025.
Scope
Aims, scope and focus
Tecnologia em Metalurgia Materiais e Mineracao is published by Associação Brasileira de Metalurgia, Materiais e Mineração. By OpenAlex counts of its recent articles, its largest topics are Microstructure and Mechanical Properties of Steels, Metallurgical Processes and Thermodynamics and Iron and Steelmaking Processes, together about 26.9% of its articles. Its main subfields are Mechanical Engineering. (generated from OpenAlex topic counts and CAS ranking data)
A TMM publica artigos nas áreas de metalurgia, materiais e mineração com o intuito de disseminar o conhecimento e promover o intercâmbio entre a comunidade acadêmica e os profissionais das indústrias, tanto em nível nacional quanto internacional. São aceitas contribuições dos tipos: artigo original, artigo de revisão e comunicações breves, nos idiomas português, inglês e espanhol, nas áreas de metalurgia, materiais e mineração, com foco nos aspectos científicos e tecnológicos dessas áreas. Para informações mais detalhadas acesse as Instruções aos Autores: http://www.tecnologiammm.com.br/instructions
From the journal's Aims & Scope
Editorial board by country: none in mainland China; most named Japan 1, India 1, Germany 1, Argentina 1, Peru 1 (5 members with a country) Editorial board ↗Publisher website ·
Main research topics OpenAlex counts of recent articles; shares are approximate
- Microstructure and Mechanical Properties of SteelsEngineering10.1%
- Metallurgical Processes and ThermodynamicsEngineering8.4%
- Iron and Steelmaking ProcessesEngineering8.4%
- Mineral Processing and GrindingEngineering8.2%
- Metallurgy and Material FormingEngineering5.5%
- Metal Alloys Wear and PropertiesMaterials Science4.8%
- High Temperature Alloys and CreepEngineering4.6%
- Minerals Flotation and Separation TechniquesEnvironmental Science4.6%
Rankings & indexing
CAS ranking and database indexing
CAS Journal Ranking
CAS Journal Ranking, upgraded edition (March 2025)Not covered
Not covered by this edition.
CAS Xinrui Journal Ranking (March 2026)Not covered
Not covered by this edition.
CAS Journal Ranking, previous upgraded edition (December 2023)Not covered
Not covered by this edition.
Database indexing
DOAJLetPub
International journal early-warning lists: not listed in any editionLetPub
Editions, and major and minor categories, are shown separately and never merged into one zone; check which edition your institution uses before you submit or report.
Metrics
Impact metrics and publication volume
- h-index
- 12OpenAlex ·
- i10-index
- 20OpenAlex ·
- 2-year mean citedness
- 0.35OpenAlex ·
- Share of gold OA articles
- 0%LetPub ·
Articles by year OpenAlex count · 878 in total · the current year is incomplete
| Year | Articles | Open access | Citations |
|---|---|---|---|
| 2026 | 54 | 54 | 160 |
| 2025 | 51 | 51 | 219 |
| 2024 | 53 | 53 | 217 |
| 2023 | 41 | 41 | 187 |
| 2022 | 64 | 64 | 151 |
| 2021 | 84 | 84 | 128 |
Sources count differently and were observed at different times, so each source's own value is kept; "publisher" marks figures from the journal's website.
Review & acceptance
Review time and acceptance
- Average review time (community reports)
- about 12 weeksLetPub ·
- Peer review
- Editorial review, Double anonymous peer reviewLetPub
Community reports come from authors' own submissions (confidence 0.5) and are not a promise from the journal; for publisher figures, the journal's own definitions apply.
Fees & open access
APC and open-access policy
Fully open accessOpenAlex
Every article is open access; authors usually pay an article processing charge (APC).
| Source | APC | Fee waiver | License | Observed |
|---|---|---|---|---|
| LetPub | BRL 650 / USD 120 | No | — |
The journal's website is authoritative for fees; sources were observed at different times and each keeps its own value, without averaging.
Submission
Article types and submission policies (journal website)
Policy excerpts from the journal's websitePreprints
- Preprints Preprints
Seguindo a Política de Ciência Aberta do SciELO, a TMM incentiva o compartilhamento do manuscrito, no formato Preprint, como forma de divulgação mais ágil das informações, antecedendo a publicação do artigo. Antes da submissão de um Preprint, é necessário que o autor preencha o Formulário de Conformidade Open Science. Atenção: o compartilhamento de um preprint em um servidor de preprints, a exempl…
Source ↗Publisher website ·
Excerpts are quoted from the journal's website; "model summary" lines are written by Workers AI and checked against the text. The journal's website is authoritative.
Before you submit
Five checks before submitting to Tecnologia em Metalurgia Materiais e Mineracao
- 1ScopeRecent output centres on Microstructure and Mechanical Properties of Steels, Metallurgical Processes and Thermodynamics.Check scope
- 2Article type and formatPrepare text, figures and references as the author guidelines ask.Author guidelines ↗
- 3English languagePolish grammar and academic style before you submit: it lowers the risk of rejection for language and improves your chances of acceptance.
- 4FeesBRL 650 (LetPub)Fee details
- 5Expected review timeabout 12 weeks · Community averageReview data
The checks are built from this page's data.
Profile
Publication details and official links
- Publisher
- Associação Brasileira de Metalurgia, Materiais e Mineração
- Country or region
- Brazil
- Language
- English, Spanish, Portuguese
- ISSN
- 2176-1515
- Electronic ISSN
- 2176-1523
- Official links
- Journal homepage ↗OpenAlex
- Author guidelines ↗LetPub
- Aims & Scope ↗LetPub
- Peer review process ↗LetPub
- Editorial board ↗LetPub
FAQ
Frequently asked questions about Tecnologia em Metalurgia Materiais e Mineracao
How long does peer review take at Tecnologia em Metalurgia Materiais e Mineracao?
Authors report an average review time of about 12 weeks. Article statistics cover accepted papers only, publisher figures follow the journal's own definitions, and community reports come from authors' own submissions; none is a promise from the journal.
Where are the editorial board members of Tecnologia em Metalurgia Materiais e Mineracao based?
Of the 5 board members whose country the journal's board page names, none are in mainland China; the countries named most often are Japan (1), India (1) and Germany (1). Counted from the institutions listed on the board page; for reference only.
Which databases index Tecnologia em Metalurgia Materiais e Mineracao?
According to LetPub and DOAJ records, Tecnologia em Metalurgia Materiais e Mineracao is indexed in DOAJ.
Is Tecnologia em Metalurgia Materiais e Mineracao open access, and what is the APC?
Tecnologia em Metalurgia Materiais e Mineracao is a fully open-access journal. APC about USD 120.
Sources and updates
The facts on this page come from LetPub, OpenAlex, Publisher website; every figure is tagged with its source and the date it was observed, and conflicting values are kept per source. LetPub source page: view ↗ (archived 2026-08-26). Last updated: .