Journal profile · Engineering-Electrical and Electronic Engineering
Science Engineering and Technology
ISSN 2831-1043 · eISSN 2744-2527 · IMS Vogosca · Bosnia and Herzegovina
FollowGet an email when its zone, impact factor or warning status changes
Science Engineering and Technology: fully open access; APC charged, amount not published; review about 9 weeks (community reports); 29 articles in 2025; indexed in Scopus.
Scope
Aims, scope and focus
Science Engineering and Technology is published by IMS Vogosca. By OpenAlex counts of its recent articles, its largest topics are Multi-Criteria Decision Making, Software Engineering Techniques and Practices and Decision Support System Applications, together about 25.7% of its articles. Its main subfields are Civil and Structural Engineering. (generated from OpenAlex topic counts and CAS ranking data)
SCIENCE, ENGINEERING AND TECHNOLOGY ISSN: 2744-2527 (Online); ISSN: 2831-1043 (Print) Science, Engineering and Technology is an open-access journal employing a double-blind peer review process and publishing scholarly research with a primary focus on engineering, applied sciences, advanced technologies, and their interdisciplinary and multidisciplinary applications. The journal supports both disciplinary and cross-disciplinary research and covers the following core and related areas: Mechanical and Materials Engineering Electrical and Electronic Engineering Civil and Structural Engineering Traffic and Transportation Engineering Industrial Engineering and Management Environmental Science and Engineering Logistics, Distribution, and Warehousing Architecture and Planning Computer Science and ICT Applied Mathematics and Statistics Engineering and Learning Technologies Interdisciplinary Applications Multidisciplinary (SET) More details about the scope of topics can be found at this link. The journal publishes original research articles, review articles, and case studies across its scope of interest. Special issues may also include editorial articles that define thematic directions, address emerging challenges, and highlight impactful research trends within engineering and technology-oriented domains. The journal is committed to the principles of open science, aiming to foster transparent knowledge sharing and broad dissemination of research findings. Through its open-access publishing model, Science, Engineering and Technology supports the global exchange of scientific and technical knowledge and assists researchers in advancing discovery, innovation, and societal impact. Publisher: O.D. IMS VogošćaAddress: Branilaca Hotonja 190, Vogošća 71 320, Bosnia and HerzegovinaE-mail and URL: info@geoims.com / www.geoims.comCo-Publisher: University of Sarajevo - Faculty of Traffic and Communications SarajevoAddress: Zmaja od Bosne 8 (Campus UNSA), Sarajevo 71 000, Bosnia and HerzegovinaE-mail and URL: set.journal@fsk.unsa.ba / www.fsk.unsa.ba Publication Frequency The journal follows a continuous online publication model through its Online First section. Articles are published individually immediately after the completion of peer review, formal acceptance, copy-editing, production, and other post-acceptance requirements. Upon publication, each article is assigned a Digital Object Identifier (DOI), as well as its final volume, issue, and page numbers. Articles published O
From the journal's Aims & Scope
Research area (LetPub): Engineering-Electrical and Electronic Engineering
Editorial board by country: 1 in mainland China (about 4%); most named Italy 3, Serbia 3, India 2, Slovenia 2, Algeria 2 (23 members with a country) Editorial board ↗Publisher website ·
Main research topics OpenAlex counts of recent articles; shares are approximate
- Multi-Criteria Decision MakingDecision Sciences13.9%
- Software Engineering Techniques and PracticesComputer Science5.9%
- Decision Support System ApplicationsBusiness, Management and Accounting5.9%
- Geotechnical and construction materials studiesEngineering5.9%
- transportation and logistics systemsSocial Sciences5%
- Asphalt Pavement Performance EvaluationEngineering4%
- Traffic control and managementEngineering4%
- Transportation Systems and LogisticsEngineering4%
Rankings & indexing
CAS ranking and database indexing
CAS Journal Ranking
CAS Journal Ranking, upgraded edition (March 2025)Not covered
Not covered by this edition.
CAS Xinrui Journal Ranking (March 2026)Not covered
Not covered by this edition.
CAS Journal Ranking, previous upgraded edition (December 2023)Not covered
Not covered by this edition.
CiteScore quartiles (Scopus, June 2026 release)
| Subject | Quartile | Rank | Percentile |
|---|---|---|---|
| Electrical and Electronic Engineering | Q3 | 656/1030 | 36th |
| Mechanical Engineering | Q3 | 490/740 | 33rd |
| Engineering (miscellaneous) | Q3 | 200/300 | 33rd |
| Civil and Structural Engineering | Q3 | 305/434 | 29th |
Scopus ranks journals by CiteScore within each subject: the 75th percentile and above is Q1, then a quartile every 25 points. A different system from the CAS zones.LetPub
Database indexing
ScopusDOAJLetPub
International journal early-warning lists: not listed in any editionLetPub
Editions, and major and minor categories, are shown separately and never merged into one zone; check which edition your institution uses before you submit or report.
Metrics
Impact metrics and publication volume
- CiteScore 2026-06
- 1.6LetPub ·
- SJR 2026-06
- 0.28LetPub ·
- SNIP 2026-06
- 0.51LetPub ·
- h-index
- 10OpenAlex ·
- i10-index
- 11OpenAlex ·
- 2-year mean citedness
- 1.49OpenAlex ·
- Share of gold OA articles
- 0%LetPub ·
Articles by year OpenAlex count · 156 in total · the current year is incomplete
| Year | Articles | Open access | Citations |
|---|---|---|---|
| 2026 | 40 | 40 | 136 |
| 2025 | 29 | 29 | 121 |
| 2024 | 27 | 27 | 70 |
| 2023 | 27 | 27 | 28 |
| 2022 | 14 | 14 | 13 |
| 2021 | 19 | 19 | 1 |
Sources count differently and were observed at different times, so each source's own value is kept; "publisher" marks figures from the journal's website.
Review & acceptance
Review time and acceptance
Review time from article dates manuscript dates registered with PubMed · to
Too few articlesOnly 2 articles from the last 24 months carry both submission and acceptance dates, too few for a median
Only articles that were accepted and published are counted, not the time spent on rejected manuscripts, so this usually runs longer than a publisher's "time to first decision".
Other sources
- Average review time (community reports)
- about 9 weeksLetPub ·
- Submission to first decision
- 7 daysPublisher website ·
- Acceptance to publication
- 7 daysPublisher website ·
- Submission to publication (journal-reported)
- about 11 weeksDOAJ ·
- Peer review
- Double anonymous peer reviewDOAJ
Community reports come from authors' own submissions (confidence 0.5) and are not a promise from the journal; for publisher figures, the journal's own definitions apply.
Fees & open access
APC and open-access policy
Fully open accessDOAJ
Every article is open access; authors usually pay an article processing charge (APC).
| Source | APC | Fee waiver | License | Observed |
|---|---|---|---|---|
| DOAJ | EUR 500 | Yes | CC BY | |
| LetPub | No APC | No | — | |
| Publisher website | EUR 500 | — | — |
Other charges and waivers (author guidelines)
- Submission fee
- No submission fee
The journal's website is authoritative for fees; sources were observed at different times and each keeps its own value, without averaging.
Submission
Article types and submission policies (journal website)
What to prepare3 items from the author guidelines
- Abstract
- 150–250 words
- Keywords
- ≥ 4
- Reference style
- IEEE
Article types accepted6
- case studyCase Study describe experimental demonstrations, real-world implementations, or specific phenomena relevant to the journal’s scope.Length not stated
- literature reviewScience, Engineering and Technology journal accepts the following article types: Research Article are high-quality scientific articles that address significant …Length not stated
- perspectiveScience, Engineering and Technology journal accepts the following article types: Research Article are high-quality scientific articles that address significant …Length not stated
- research articleScience, Engineering and Technology journal accepts the following article types: Research Article are high-quality scientific articles that address significant …Length not stated
- review articleScience, Engineering and Technology journal accepts the following article types: Research Article are high-quality scientific articles that address significant …Length not stated
- viewpointScience, Engineering and Technology journal accepts the following article types: Research Article are high-quality scientific articles that address significant …Length not stated
Policy excerpts from the journal's websiteAI use, License & copyright, Open access, Peer review, Plagiarism
- AI use Ethical use of AI tools
Generative AI use must be transparently disclosed. Model summary
When utilizing generative AI tools, authors must transparently disclose their use in the article, similar to any other software employed. For more information, please refer to the Publication Ethics (click here).
Source ↗Publisher website ·- License & copyright Copyright Notice
Open-access articles in Science, Engineering, and Technology journal are published under CC (Creative Commons) licenses, providing an industry-standard framework to facilitate the easy re-use of open-access material. Authors retain copyright and grant the journal the right of first publication, with the work simultaneously licensed under the CC BY license (Creative Commons Attribution 4.0 Internat…
Source ↗Publisher website ·- Open access Open Access
Science, Engineering and Technology is an open-access scientific journal dedicated to providing high-quality research freely and openly to readers worldwide. We firmly believe that open access to scientific knowledge fosters collaboration, accelerates research progress, and facilitates the global dissemination of scholarly findings. Consequently, all articles are freely available for reading and r…
Source ↗Publisher website ·- Peer review Peer Review Process
Double-blind peer review model. Model summary
Science, Engineering and Technology journal operates under a double-blind peer review model. For more information, please refer to the Peer Review Process (click here).
Source ↗Publisher website ·- Plagiarism Plagiarism Policy
Plagiarism policy: authors must submit original work with appropriate citation. Model summary
The authors should ensure that they have submitted the original work, and if the authors have used the work of others, that appropriate citation is provided. For more information, please refer to the Publication Ethics (click here).
Source ↗Publisher website ·
Excerpts are quoted from the journal's website; "model summary" lines are written by Workers AI and checked against the text. The journal's website is authoritative.
Before you submit
Five checks before submitting to Science Engineering and Technology
- 1ScopeRecent output centres on Multi-Criteria Decision Making, Software Engineering Techniques and Practices.Check scope
- 2Article type and formatAbstract: 150–250 words; Keywords: ≥ 4; Reference style: IEEE.Author guidelines ↗
- 3English languagePolish grammar and academic style before you submit: it lowers the risk of rejection for language and improves your chances of acceptance.
- 4FeesEUR 500 (DOAJ), waivers availableFee details
- 5Expected review timeabout 9 weeks · Community average; too few article dates (2)Review data
The checks are built from this page's data.
Profile
Publication details and official links
- Publisher
- IMS Vogosca
- Country or region
- Bosnia and Herzegovina
- Language
- English
- ISSN
- 2831-1043
- Electronic ISSN
- 2744-2527
- Official links
- Journal homepage ↗OpenAlex
- Submission system ↗Publisher website
- Author guidelines ↗LetPub
- Aims & Scope ↗LetPub
- Special issues ↗Publisher website
- APC information ↗DOAJ
- Fee waivers ↗DOAJ
- Open access statement ↗DOAJ
- License & copyright ↗DOAJ
- Peer review process ↗LetPub
- Editorial board ↗LetPub
- Plagiarism policy ↗DOAJ
FAQ
Frequently asked questions about Science Engineering and Technology
How long does peer review take at Science Engineering and Technology?
Authors report an average review time of about 9 weeks. Article statistics cover accepted papers only, publisher figures follow the journal's own definitions, and community reports come from authors' own submissions; none is a promise from the journal.
What are the manuscript requirements of Science Engineering and Technology?
According to the journal's author guidelines: Abstract: 150–250 words; Keywords: ≥ 4; Reference style: IEEE. A model extracted these from the author guidelines and each was checked against the text; check the latest version on the journal's website before submitting.
Where are the editorial board members of Science Engineering and Technology based?
Of the 23 board members whose country the journal's board page names, 1 (about 4%) are in mainland China; the countries named most often are Italy (3), Serbia (3) and India (2). Counted from the institutions listed on the board page; for reference only.
Which databases index Science Engineering and Technology?
According to LetPub and DOAJ records, Science Engineering and Technology is indexed in Scopus and DOAJ.
Is Science Engineering and Technology open access, and what is the APC?
Science Engineering and Technology is a fully open-access journal. APC charged, amount not published.
Sources and updates
The facts on this page come from LetPub, Publisher website, OpenAlex, DOAJ; every figure is tagged with its source and the date it was observed, and conflicting values are kept per source. LetPub source page: view ↗ (archived 2026-08-26). Last updated: .