Journal profile · ENGINEERING, MULTIDISCIPLINARY
Modelling and Simulation in Engineering
ISSN 1687-5591 · eISSN 1687-5605 · John Wiley & Sons, Inc. · USA
Modelling and Simulation in Engineering: CAS Zone 4 · Engineering (2025 upgraded edition); impact factor 1.1 (journal website); fully open access; APC about USD 1,100; median 171 days to acceptance (77 articles, last 24 months); acceptance rate 35% (journal website); 33 articles in 2025; indexed in ESCI and Scopus.
Scope
Aims, scope and focus
Modelling and Simulation in Engineering is published by John Wiley & Sons, Inc. and is in Zone 4 of Engineering in the CAS Journal Ranking (2025 upgraded edition). By OpenAlex counts of its recent articles, its largest topics are Fluid Dynamics and Turbulent Flows, Heat Transfer and Optimization and Wind and Air Flow Studies, together about 18.7% of its articles. Its main subfields are Computational Mechanics and Mechanical Engineering. (generated from OpenAlex topic counts and CAS ranking data)
Modelling and Simulation in Engineering is an open access journal that aims to provide a forum for the discussion of formalisms, methodologies and simulation tools which relate to the modelling and simulation of human-centred engineering systems.
From the journal's Aims & Scope
Research area (LetPub): ENGINEERING, MULTIDISCIPLINARY
Main research topics OpenAlex counts of recent articles; shares are approximate
- Fluid Dynamics and Turbulent FlowsEngineering6.4%
- Heat Transfer and OptimizationEngineering6.1%
- Wind and Air Flow StudiesEnvironmental Science6.1%
- Heat Transfer MechanismsEngineering5.9%
- Nanofluid Flow and Heat TransferEngineering5.6%
- Computational Fluid Dynamics and AerodynamicsEngineering4.7%
- Fluid Dynamics Simulations and InteractionsEngineering4.5%
- Transportation Planning and OptimizationSocial Sciences4.2%
Rankings & indexing
CAS ranking and database indexing
CAS Journal Ranking
CAS Journal Ranking, upgraded edition (March 2025)Engineering Zone 4
| Level | Category | Zone |
|---|---|---|
| Major | Engineering | Zone 4 |
| Minor | Engineering, Multidisciplinary | Zone 4 |
Top journal: noReview journal: no
CAS Xinrui Journal Ranking (March 2026)Engineering Zone 4
| Level | Category | Zone |
|---|---|---|
| Major | Engineering | Zone 4 |
| Minor | Engineering, Multidisciplinary | Zone 4 |
Top journal: noReview journal: not marked
CAS Journal Ranking, previous upgraded edition (December 2023)Not covered
Not covered by this edition.
Database indexing
ESCIScopusDOAJLetPub
International journal early-warning lists: not listed in any editionLetPub
Editions, and major and minor categories, are shown separately and never merged into one zone; check which edition your institution uses before you submit or report.
Metrics
Impact metrics and publication volume
Impact
- Impact factor (publisher)
- 1.1Publisher website ·
- CiteScore 2026-06
- 2.8LetPub ·
- CiteScore (publisher)
- 2.8Publisher website ·
- SJR 2026-06
- 0.26LetPub ·
- SNIP 2026-06
- 0.67LetPub ·
- h-index
- 34OpenAlex ·
- i10-index
- 194OpenAlex ·
- 2-year mean citedness
- 0.98OpenAlex ·
- Self-citation rate
- 9.1%LetPub ·
- Share of gold OA articles
- 100%LetPub ·
Volume
- Articles per year
- 32LetPub ·
Articles by year OpenAlex count · 660 in total · the current year is incomplete
| Year | Articles | Open access | Citations |
|---|---|---|---|
| 2026 | 46 | 46 | 2 |
| 2025 | 33 | 33 | 27 |
| 2024 | 40 | 40 | 88 |
| 2023 | 19 | 19 | 68 |
| 2022 | 45 | 45 | 296 |
| 2021 | 38 | 38 | 179 |
Sources count differently and were observed at different times, so each source's own value is kept; "publisher" marks figures from the journal's website.
Review & acceptance
Review time and acceptance
Review time from article dates manuscript dates registered with Crossref · to
171 daysMedian, submission to acceptance · P25–P75 91 days – 242 days
- Acceptance to online
- median 30 days (77 articles)
- Submission to online
- median 206 days
- Sample
- 77 articles with submission and acceptance dates (76 in the window); the latest was accepted on
Only articles that were accepted and published are counted, not the time spent on rejected manuscripts, so this usually runs longer than a publisher's "time to first decision".
Other sources
- Average review time (community reports)
- about 18 weeksLetPub ·
- Acceptance rate (publisher)
- 35%Publisher website ·
- Submission to first decision
- 59 daysPublisher website ·
- Submission to publication (journal-reported)
- about 18 weeksDOAJ ·
- Peer review
- Single anonymous peer reviewDOAJ
Community reports come from authors' own submissions (confidence 0.5) and are not a promise from the journal; for publisher figures, the journal's own definitions apply.
Fees & open access
APC and open-access policy
Every article is open access; authors usually pay an article processing charge (APC).
| Source | APC | Fee waiver | License | Observed |
|---|---|---|---|---|
| DOAJ | USD 1,100 / GBP 740 / EUR 960 | Yes | CC BY | |
| OpenAlex | USD 1,000 / EUR 870 / GBP 740 | — | — | |
| LetPub | USD 925 | Yes | — |
The journal's website is authoritative for fees; sources were observed at different times and each keeps its own value, without averaging.
Submission
Article types and submission policies (journal website)
What to prepare2 items from the author guidelines
- Reference style
- Chicago
- First submission
- Free format: the journal's layout is not required
Article types accepted7
- original researchThe journal will consider the following article types: Research articles Research articles should present the results of an original research study. These manus…Length not stated
- research articleThe journal will consider the following article types: Research articles Research articles should present the results of an original research study. These manus…Length not stated
- research articlesResearch articles should present the results of an original research study. These manuscripts should describe how the research project was conducted and provide…Length not stated
- reviewThe journal will consider the following article types: Research articles Research articles should present the results of an original research study. These manus…Length not stated
- review articleThe journal will consider the following article types: Research articles Research articles should present the results of an original research study. These manus…Length not stated
- reviewsA review article provides an overview of the published literature in a particular subject area.Length not stated
- systematic reviewThe journal will consider the following article types: Research articles Research articles should present the results of an original research study. These manus…Length not stated
Policy excerpts from the journal's websiteAuthorship, Conflicts of interest, Data availability, Publication ethics, License & copyright, Open access, Peer review, Plagiarism, Preprints, Trial registration / reporting guidelines
- Authorship Title and authorship information
The following information should be included: Manuscript title Full author names Full institutional mailing addresses Email addresses Affiliations. The publisher remains neutral with regard to jurisdictional claims in institutional affiliations. Responsibility for affiliations ultimately rests with the author, although the publisher may request changes be made to countries listed in affiliations t…
Source ↗Publisher website ·- Conflicts of interest Conflicts of interest
Original work only; preprint servers allowed. Model summary
Authors must declare all relevant interests that could be perceived as conflicting. Authors should explain why each interest may represent a conflict. If no conflicts exist, the authors should state this. Submitting authors are responsible for co-authors declaring their interests. Conflicts of interest (COIs, also known as 'competing interests') occur when issues outside research could be reasonab…
Source ↗Publisher website ·- Data availability Data availability
Data availability statement required. Model summary
Authors must include a data availability statement with their submission. When submitting a manuscript, submitting authors will be asked to select from several pre-written statements or use the text editor to tell us about data availability with regard to their submission. Review our Data Sharing Policy to understand which data availability statement is right for your submission.
Source ↗Publisher website ·- Publication ethics
Human experiments must comply with Declaration of Helsinki (1964). Model summary
For any experiments on humans, all work must be conducted in accordance with the Declaration of Helsinki (1964)
Source ↗Publisher website ·- License & copyright Copyright and permissions
Authors retain the copyright of their manuscripts, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided that the original work is properly cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not speci…
Source ↗Publisher website ·- Open access
Copyright retained by authors; open access articles under CC BY. Model summary
Authors retain the copyright of their manuscripts, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided that the original work is properly cited.
Source ↗Publisher website ·- Peer review Peer review
Single-anonymized peer review model, for applicable article types. Model summary
The journal follows a single-anonymized peer review model, for applicable article types. Information on the Peer Review model can be found here. Wiley's policy on the confidentiality of the review process is available here. All submitted articles are subject to assessment and peer review to ensure editorial appropriateness and technical correctness. Research published in the journal must be: Scien…
Source ↗Publisher website ·- Plagiarism
iThenticate CrossCheck used for plagiarism detection. Model summary
This journal uses iThenticate’s CrossCheck software to detect instances of overlapping and similar text in submitted manuscripts.
Source ↗Publisher website ·- Preprints Preprints
Preprint servers allowed; preprint should be cited. Model summary
The journal accepts articles previously published on preprint servers, and does not consider this to compromise the novelty of the results. Articles based on content previously made public only on a preprint server, institutional repository, or in a thesis will be considered. The preprint should be cited.
Source ↗Publisher website ·- Trial registration / reporting guidelines Reporting guidelines
Authors are strongly encouraged to use appropriate reporting guidelines when preparing and submitting manuscripts, to maximize transparency and reproducibility. Our editors and reviewers are also encouraged to use them in the review process. Completed checklists should be provided in the supplementary files on submission. We particularly encourage the use of: CONSORT for randomized controlled tria…
Source ↗Publisher website ·
Excerpts are quoted from the journal's website; "model summary" lines are written by Workers AI and checked against the text. The journal's website is authoritative.
Profile
Publication details and official links
- Publisher
- John Wiley & Sons, Inc.
- Country or region
- USA
- Language
- English
- ISSN
- 1687-5591
- Electronic ISSN
- 1687-5605
- Official links
- Journal homepage ↗OpenAlex
- Submission system ↗LetPub
- Author guidelines ↗DOAJ
- Aims & Scope ↗DOAJ
- Special issues ↗Publisher website
- APC information ↗DOAJ
- Fee waivers ↗DOAJ
- Open access statement ↗DOAJ
- License & copyright ↗DOAJ
- Peer review process ↗DOAJ
- Editorial board ↗DOAJ
- Plagiarism policy ↗DOAJ
FAQ
Frequently asked questions about Modelling and Simulation in Engineering
What CAS zone is Modelling and Simulation in Engineering in?
In the 2025 upgraded edition of the CAS Journal Ranking, Modelling and Simulation in Engineering is in Zone 4 of Engineering, and in Zone 4 of the minor category Engineering, Multidisciplinary. In the 2026 Xinrui edition it is in Zone 4 of Engineering. Zones from different editions, and from major and minor categories, are not interchangeable.
What is the impact factor of Modelling and Simulation in Engineering?
The journal's website gives an impact factor of 1.1; this is the journal's own figure, as LetPub lists none for it; CiteScore 2.8, h-index 34.
How long does peer review take at Modelling and Simulation in Engineering?
Based on the dates recorded on 77 articles published between October 2024 and October 2026 (the last 24 months), the median time from submission to acceptance is 171 days (interquartile range 91–242 days); authors report an average review time of about 18 weeks; the journal's website gives an acceptance rate of 35%. Article statistics cover accepted papers only, publisher figures follow the journal's own definitions, and community reports come from authors' own submissions; none is a promise from the journal.
What are the manuscript requirements of Modelling and Simulation in Engineering?
According to the journal's author guidelines: Reference style: Chicago; First submission: Free format: the journal's layout is not required. A model extracted these from the author guidelines and each was checked against the text; check the latest version on the journal's website before submitting.
Which databases index Modelling and Simulation in Engineering?
According to LetPub and DOAJ records, Modelling and Simulation in Engineering is indexed in ESCI, Scopus and DOAJ.
Is Modelling and Simulation in Engineering open access, and what is the APC?
Modelling and Simulation in Engineering is a fully open-access journal. APC about USD 1,100.
Sources and updates
The facts on this page come from LetPub, Publisher website, OpenAlex, DOAJ; every figure is tagged with its source and the date it was observed, and conflicting values are kept per source. LetPub source page: view ↗ (archived 2026-08-26). Last updated: .