Journal profile · Materials Science-Metals and Alloys
Journal of Materiomics
ISSN 2352-8478 · eISSN 2352-8486 · Chinese Ceramic Society · PEOPLES R CHINA
Journal of Materiomics: CAS Zone 2 · Materials Science (2025 upgraded edition); impact factor 10.64; fully open access; APC about USD 1,750; review about 66 days (submission to acceptance, publisher); 113 articles in 2025; indexed in SCIE and Scopus.
Scope
Aims, scope and focus
Journal of Materiomics is published by Chinese Ceramic Society and is in Zone 2 of Materials Science in the CAS Journal Ranking (2025 upgraded edition). By OpenAlex counts of its recent articles, its largest topics are Ferroelectric and Piezoelectric Materials, Advanced Thermoelectric Materials and Devices and Multiferroics and related materials, together about 29.5% of its articles. Its main subfields are Materials Chemistry, Electrical and Electronic Engineering and Biomedical Engineering. (generated from OpenAlex topic counts and CAS ranking data)
The Journal of Materiomics aims to provide a continuous forum for the dissemination of research in the general field of materials science, particularly systematic studies of the relationships among composition, processing, structure, property, and performance of advanced materials. Supported by the Chinese Ceramic Society, the Journal of Materiomics is a peer-reviewed open-access journal, indexed in SCIE and Scopus. The abbreviated title of this journal is J Materiomics.The following aspects of the science and engineering of advanced inorganic materials are of particular interest: (1) Functional materials, including ferroelectrics, piezoelectrics, multiferroics, magnetics; semiconductors, optoelectronic and electronic materials, etc. (2) Advanced energy materials for applications in solar energy, battery, fuel cell, thermoelectric conversion, hydrogen storage, etc. (3) Advanced structural ceramics including ceramic composite materials. (4) Nano-scale and low dimensional materials towards promising applications for nanotechnology and environmental science. (5) Multi-scale design and characterization of advanced functional materials.
From the journal's Aims & Scope
Research area (LetPub): Materials Science-Metals and Alloys
Editor-in-chief Jing-Feng LiPublisher website
Editorial board by country: 124 in mainland China (about 83%); most named Mainland China 124, United States 7, South Korea 3, France 3, Japan 2 (149 members with a country) Editorial board ↗Publisher website ·
Main research topics OpenAlex counts of recent articles; shares are approximate
- Ferroelectric and Piezoelectric MaterialsMaterials Science14%
- Advanced Thermoelectric Materials and DevicesMaterials Science8.6%
- Multiferroics and related materialsMaterials Science7%
- Microwave Dielectric Ceramics SynthesisEngineering6.2%
- Dielectric materials and actuatorsEngineering5.2%
- Advancements in Battery MaterialsEngineering5.1%
- Advanced Battery Materials and TechnologiesEngineering4.1%
- Thermal properties of materialsMaterials Science3.9%
Rankings & indexing
CAS ranking and database indexing
CAS Journal Ranking
CAS Journal Ranking, upgraded edition (March 2025)Materials Science Zone 2
| Level | Category | Zone |
|---|---|---|
| Major | Materials Science | Zone 2 |
| Minor | Materials Science, Multidisciplinary | Zone 2 |
| Minor | Physics, Applied | Zone 2 |
Top journal: noReview journal: no
CAS Xinrui Journal Ranking (March 2026)Materials Science Zone 2
| Level | Category | Zone |
|---|---|---|
| Major | Materials Science | Zone 2 |
| Minor | Chemistry, Physical | Zone 2 |
| Minor | Materials Science, Multidisciplinary | Zone 2 |
| Minor | Physics, Applied | Zone 2 |
Top journal: noReview journal: not marked
CAS Journal Ranking, previous upgraded edition (December 2023)Materials Science Zone 1
| Level | Category | Zone |
|---|---|---|
| Major | Materials Science | Zone 1 |
| Minor | Chemistry, Physical | Zone 2 |
| Minor | Materials Science, Multidisciplinary | Zone 2 |
| Minor | Physics, Applied | Zone 2 |
Top journal: noReview journal: no
Database indexing
SCIEScopusDOAJLetPub
International journal early-warning lists: not listed in any editionLetPub
Editions, and major and minor categories, are shown separately and never merged into one zone; check which edition your institution uses before you submit or report.
Metrics
Impact metrics and publication volume
Impact
- Impact factor
- 10.64LetPub ·
- Impact factor (publisher)
- 10.6Publisher website ·
- CiteScore 2026-06
- 16.5LetPub ·
- CiteScore (publisher)
- 16.5Publisher website ·
- SJR 2026-06
- 2.04LetPub ·
- SNIP 2026-06
- 1.78LetPub ·
- h-index
- 84OpenAlex ·
- i10-index
- 821OpenAlex ·
- 2-year mean citedness
- 7.32OpenAlex ·
- Self-citation rate
- 5.7%LetPub ·
- Share of gold OA articles
- 100%LetPub ·
Volume
- Articles per year
- 132LetPub ·
Articles by year OpenAlex count · 1,275 in total · the current year is incomplete
| Year | Articles | Open access | Citations |
|---|---|---|---|
| 2026 | 121 | 121 | 91 |
| 2025 | 113 | 113 | 511 |
| 2024 | 178 | 178 | 2,412 |
| 2023 | 175 | 175 | 4,893 |
| 2022 | 124 | 124 | 3,240 |
| 2021 | 140 | 140 | 5,572 |
Sources count differently and were observed at different times, so each source's own value is kept; "publisher" marks figures from the journal's website.
Review & acceptance
Review time and acceptance
Publisher-reported review time from the journal's website
66 dayssubmission to acceptance · community reports about 12 weeks
The publisher's own definition applies; dates from this journal's articles in the last 24 months are not available yet, so the publisher's figure is used.
Figures by source
- Average review time (community reports)
- about 12 weeksLetPub ·
- Submission to first decision
- 9 daysPublisher website ·
- First decision after review
- 37 daysPublisher website ·
- Submission to acceptance
- 66 daysPublisher website ·
- Acceptance to publication
- 28 daysPublisher website ·
- Submission to publication (journal-reported)
- about 23 weeksDOAJ ·
- Peer review
- Single anonymous peer reviewDOAJ
Community reports come from authors' own submissions (confidence 0.5) and are not a promise from the journal; for publisher figures, the journal's own definitions apply.
Fees & open access
APC and open-access policy
Fully open accessDOAJ
Every article is open access; authors usually pay an article processing charge (APC).
| Source | APC | Fee waiver | License | Observed |
|---|---|---|---|---|
| DOAJ | USD 1,750 | Yes | CC BY, CC BY-NC-ND | |
| OpenAlex | USD 1,750 / EUR 1,640 / GBP 1,400 / JPY 217,050 | — | — | |
| LetPub | USD 1,750 | Yes | — | |
| Publisher website | USD 1,750 | — | — |
The journal's website is authoritative for fees; sources were observed at different times and each keeps its own value, without averaging.
Submission
Article types and submission policies (journal website)
Article types accepted4, with length limits
- opinionpected to propose a solution in detail. Opinion papers are usually limited to 1 page (–1000 words) with less than 10 references. Before you begin Ethics in pmain text ≤ 1,000 words · references ≤ 10
- perspectivepected to propose a solution in detail. Perspectives should be less than 3000 words with a maximum of 15 references and 1–2 displayed items. Remain text ≤ 3,000 words · references ≤ 15
- review articleSummarize the recent progress in certain core scientific disciplines, comment on the research status, and highlight future directions. The author(s) should focu…references ≤ 100
- short communicationProvide rapid and concise report of a novel finding that is brief in nature but is of general interest to a broad readership. Short Communications are expected …references ≤ 15
Policy excerpts from the journal's websiteAI use, Authorship, Conflicts of interest, License & copyright, Open access, Peer review, Preprints
- AI use Declaration of generative AI in scientific writing
Authors must declare the use of generative AI tools in the manuscript preparation process upon submission of the paper.Generative AI and AI-assisted technologies (“AI tools”) have been rapidly adopted in research and scholarly publishing, offering significant benefits while requiring clear standards for responsible and transparent use.Authors preparing a manuscript for this journal may use AI tool…
Source ↗Publisher website ·- Authorship Author contributions
For transparency, we require corresponding authors to provide co-author contributions to the manuscript using the relevant CRediT roles. The CRediT taxonomy includes 14 different roles describing each contributor's specific contribution to the scholarly output. The roles are: Conceptualization; Data curation; Formal analysis; Funding acquisition; Investigation; Methodology; Project administration;…
Source ↗Publisher website ·- Conflicts of interest Declaration of competing interest
All authors must disclose any financial and personal relationships with other people or organizations that could inappropriately influence (bias) their work. Examples of potential conflicts of interest include employment, consultancies, stock ownership, honoraria, paid expert testimony, patent applications/registrations, and grants or other funding. Authors should complete the declaration of compe…
Source ↗Publisher website ·- License & copyright Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement'. Acceptance of the agreement will ensure the widest possible dissemination of information. An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.Permission of the soc…
Source ↗Publisher website ·- Open access Open access
Please visit our Open Access page for more information about open access publishing in this journal.
Source ↗Publisher website ·- Peer review Peer review
This journal operates a single anonymized review process. All contributions will be initially assessed by the editor for suitability for the journal. Papers deemed suitable are then typically sent to a minimum of two independent expert reviewers to assess the scientific quality of the paper. The Editor is responsible for the final decision regarding acceptance or rejection of articles. The Editor'…
Source ↗Publisher website ·- Preprints Preprints
Please note that preprints can be shared anywhere at any time, in line with Elsevier's sharing policy. Sharing your preprints e.g. on a preprint server will not count as prior publication (see 'Multiple, redundant or concurrent publication' for more information).
Source ↗Publisher website ·
Excerpts are quoted from the journal's website; "model summary" lines are written by Workers AI and checked against the text. The journal's website is authoritative.
Profile
Publication details and official links
- Publisher
- Chinese Ceramic Society
- Country or region
- PEOPLES R CHINA
- Language
- English
- ISSN
- 2352-8478
- Electronic ISSN
- 2352-8486
- Official links
- Journal homepage ↗DOAJ
- Submission system ↗Publisher website
- Author guidelines ↗DOAJ
- Aims & Scope ↗LetPub
- Special issues ↗Publisher website
- APC information ↗DOAJ
- Fee waivers ↗DOAJ
- Open access statement ↗DOAJ
- License & copyright ↗DOAJ
- Peer review process ↗DOAJ
- Editorial board ↗LetPub
- Plagiarism policy ↗DOAJ
FAQ
Frequently asked questions about Journal of Materiomics
What CAS zone is Journal of Materiomics in?
In the 2025 upgraded edition of the CAS Journal Ranking, Journal of Materiomics is in Zone 2 of Materials Science, and in Zone 2 of the minor category Materials Science, Multidisciplinary / Physics, Applied. In the 2026 Xinrui edition it is in Zone 2 of Materials Science. Zones from different editions, and from major and minor categories, are not interchangeable.
What is the impact factor of Journal of Materiomics?
The latest impact factor listed by LetPub is 10.64; CiteScore 16.5, h-index 84.
How long does peer review take at Journal of Materiomics?
The publisher reports about 66 days (submission to acceptance); authors report an average review time of about 12 weeks. Article statistics cover accepted papers only, publisher figures follow the journal's own definitions, and community reports come from authors' own submissions; none is a promise from the journal.
Where are the editorial board members of Journal of Materiomics based?
Of the 149 board members whose country the journal's board page names, 124 (about 83%) are in mainland China; the countries named most often are Mainland China (124), United States (7) and South Korea (3). Counted from the institutions listed on the board page; for reference only.
Which databases index Journal of Materiomics?
According to LetPub and DOAJ records, Journal of Materiomics is indexed in SCIE, Scopus and DOAJ.
Is Journal of Materiomics open access, and what is the APC?
Journal of Materiomics is a fully open-access journal. APC about USD 1,750.
Sources and updates
The facts on this page come from LetPub, Publisher website, OpenAlex, DOAJ; every figure is tagged with its source and the date it was observed, and conflicting values are kept per source. LetPub source page: view ↗ (archived 2026-08-25). Last updated: .