Journal profile · Optics
Infrared Physics & Technology
ISSN 1350-4495 · eISSN 1879-0275 · Elsevier · NETHERLANDS · Bimonthly
Infrared Physics & Technology: CAS Zone 2 · Physics & Astronomy (2025 upgraded edition); impact factor 3.77; hybrid open access; APC about USD 3,000; review about 103 days (submission to acceptance, publisher); community-reported acceptance: easy (Elsevier website: 36.8%); 596 articles in 2025; indexed in SCIE and Scopus.
Scope
Aims, scope and focus
Infrared Physics & Technology is published by Elsevier and is in Zone 2 of Physics & Astronomy in the CAS Journal Ranking (2025 upgraded edition). By OpenAlex counts of its recent articles, its largest topics are Infrared Target Detection Methodologies, Thermography and Photoacoustic Techniques and Advanced Semiconductor Detectors and Materials, together about 25.6% of its articles. (generated from OpenAlex topic counts and CAS ranking data)
The Journal covers the entire field of infrared physics and technology: theory, experiment, application, devices and instrumentation. Infrared' is defined as covering the near, mid and far infrared (terahertz) regions from 0.75um (750nm) to 1mm (300GHz.) Submissions in the 300GHz to 100GHz region may be accepted at the editors discretion if their content is relevant to shorter wavelengths. The very near infrared, VNIR, defined as 750nm-1200nm is subject to special consideration.Where a submission utilises the VNIR alone, or in conjunction with longer wavelengths and uses typically `infrared? technology such as InGaAs detectors, it is in scope.Where a submission utilises the VNIR and shorter wavelengths in the visible, and uses typically visible region technology such as silicon detectors, it is unlikely to be appropriate to this Journal. Submissions must be primarily concerned with and directly relevant to this spectral region. Its core topics can be summarized as the generation, propagation and detection, of infrared radiation; the associated optics, materials and devices; and its use in all fields of science, industry, engineering and medicine. When applying infrared technology to other fields, authors should pay particular attention to emphasizing the key role of infrared.Infrared techniques occur in many different fields, notably spectroscopy and interferometry; material characterization and processing; atmospheric physics, astronomy and space research. Scientific aspects include lasers, quantum optics, quantum electronics, image processing and semiconductor physics. Some important applications are medical diagnostics and treatment, industrial inspection and environmental monitoring.A fuller though not exhaustive list of topics would include: Astronomy, Astrophysics and Space ResearchAtmospheric transmission, turbulence and scatteringBiomedical and Medical applicationsCultural heritageEnvironmental applications: pollution and monitoringDetectors: quantum and thermalImage processingIndustrial applicationsInfrared lasers including free electron lasersMaterial properties, processing and characterizationNon-destructive testing, active and passive.• Optical elements: lenses, polarizers, filters, mirrors, fibres, etc.Radiometry: techniques, calibration, standards and instrumentationRemote sensing and range-findingSolid-state physicsThermal imaging: device design, testing and applicationsSynchroton radiation in the infraredAuthors may indicate opposed reviewers in the submission system if they believe there may be a conflict of interest.During submission, please suggest at least one and a maximum of five potential reviewers. You are strongly encouraged to submit recommendations for appropriately senior and knowledgeable referees having no connection to your work and not located at your institution, as this may speed up the processing of your manuscript. The editorial office may not use your suggestions, but they are greatly appreciated. Where the author works in a country with a small community of research workers in his or her field, it is highly desirable that at least two of the suggested referees are from another country.To be suitable for submission to this Journal, manuscripts should advance the field of Infrared Physics and Technology. Their target audience should be those working in the field of Infrared Physics and Technology. Papers using infrared methods, such as FTIR spectroscopy or thermography, in an essentially routine way to advance some other field, and of interest to other readerships, and generally not suited to this Journal.The Journal does include within its scope genuinely new applications of established infrared methods. In the field of medical applications such as the detection of breast cancer or diabetic pathology, submissions to IRPT should normally include advances in hardware or data collection protocols etc. Such studies are required to have adequate sized and well characterized cohorts. Clinical stu
From the journal's Aims & Scope
Research area (LetPub): Optics
Editor-in-chief Weida HuPublisher website
Editorial board by country: 10 in mainland China (about 29%); most named Mainland China 10, United States 9, Australia 4, United Kingdom 3, India 2 (34 members with a country) Editorial board ↗Publisher website ·
Main research topics OpenAlex counts of recent articles; shares are approximate
- Infrared Target Detection MethodologiesEngineering10.3%
- Thermography and Photoacoustic TechniquesEngineering8.1%
- Advanced Semiconductor Detectors and MaterialsEngineering7.2%
- Spectroscopy and Laser ApplicationsChemistry6.1%
- Semiconductor Quantum Structures and DevicesPhysics and Astronomy5.7%
- Spectroscopy and Chemometric AnalysesChemistry5.3%
- Calibration and Measurement TechniquesEngineering5.2%
- Advanced Fiber Laser TechnologiesPhysics and Astronomy5.2%
Rankings & indexing
CAS ranking and database indexing
CAS Journal Ranking
CAS Journal Ranking, upgraded edition (March 2025)Physics & Astronomy Zone 2
| Level | Category | Zone |
|---|---|---|
| Major | Physics & Astronomy | Zone 2 |
| Minor | Instruments & Instrumentation | Zone 3 |
| Minor | Optics | Zone 3 |
| Minor | Physics, Applied | Zone 3 |
Top journal: noReview journal: no
CAS Xinrui Journal Ranking (March 2026)Physics & Astronomy Zone 2
| Level | Category | Zone |
|---|---|---|
| Major | Physics & Astronomy | Zone 2 |
| Minor | Instruments & Instrumentation | Zone 3 |
| Minor | Optics | Zone 3 |
| Minor | Physics, Applied | Zone 3 |
Top journal: noReview journal: not marked
CAS Journal Ranking, previous upgraded edition (December 2023)Physics & Astronomy Zone 3
| Level | Category | Zone |
|---|---|---|
| Major | Physics & Astronomy | Zone 3 |
| Minor | Instruments & Instrumentation | Zone 3 |
| Minor | Optics | Zone 3 |
| Minor | Physics, Applied | Zone 3 |
Top journal: noReview journal: no
Database indexing
SCIEScopusLetPub
International journal early-warning lists: not listed in any editionLetPub
Editions, and major and minor categories, are shown separately and never merged into one zone; check which edition your institution uses before you submit or report.
Metrics
Impact metrics and publication volume
Impact
- Impact factor
- 3.77LetPub ·
- Impact factor (publisher)
- 3.8Publisher website ·
- CiteScore 2026-06
- 6.5LetPub ·
- CiteScore (publisher)
- 6.5Publisher website ·
- SJR 2026-06
- 0.6LetPub ·
- SNIP 2026-06
- 1.04LetPub ·
- h-index
- 56LetPub ·
- h-index
- 103OpenAlex ·
- i10-index
- 3,022OpenAlex ·
- 2-year mean citedness
- 3.86OpenAlex ·
- Self-citation rate
- 13.2%LetPub ·
- Share of gold OA articles
- 6.08%LetPub ·
Volume
- Articles per year
- 569LetPub ·
Articles by year OpenAlex count · 6,916 in total · the current year is incomplete
| Year | Articles | Open access | Citations |
|---|---|---|---|
| 2026 | 519 | 57 | 232 |
| 2025 | 596 | 47 | 2,105 |
| 2024 | 525 | 51 | 3,987 |
| 2023 | 505 | 46 | 5,621 |
| 2022 | 466 | 45 | 6,614 |
| 2021 | 347 | 33 | 6,096 |
Sources count differently and were observed at different times, so each source's own value is kept; "publisher" marks figures from the journal's website.
Review & acceptance
Review time and acceptance
Publisher-reported review time from the journal's website
103 dayssubmission to acceptance · community reports about 3 months
The publisher's own definition applies; dates from this journal's articles in the last 24 months are not available yet, so the publisher's figure is used.
Figures by source
- Average review time (community reports)
- about 3 monthsLetPub ·
- Average acceptance (community reports)
- 36.8%LetPub ·
- Submission to first decision
- 10 daysPublisher website ·
- First decision after review
- 51 daysPublisher website ·
- Submission to acceptance
- 103 daysPublisher website ·
- Acceptance to publication
- 3 daysPublisher website ·
- Peer review
- Single anonymous peer reviewPublisher website
Community reports come from authors' own submissions (confidence 0.5) and are not a promise from the journal; for publisher figures, the journal's own definitions apply.
Fees & open access
APC and open-access policy
A subscription journal in which authors can pay to publish their article open access.
| Source | APC | Fee waiver | License | Observed |
|---|---|---|---|---|
| OpenAlex | USD 3,000 / EUR 2,810 / GBP 2,400 / JPY 372,090 | — | — | |
| Publisher website | USD 2,650 | — | — |
A hybrid journal charges the APC only when the author chooses open access; publishing under the subscription model is usually free.
The journal's website is authoritative for fees; sources were observed at different times and each keeps its own value, without averaging.
Submission
Article types and submission policies (journal website)
What to prepare5 items from the author guidelines
- Abstract
- ≤ 250 words
- Keywords
- 1–7
- Reference style
- Numbered, in order of citation
- Templates
- LaTeX
- Suggested reviewers
- Optional
Article types accepted9
- full paperResearch Papers. There are no arbitrary limits on the length of a paper but the content of the paper must justify its length. The usual range is 6-14 printed pa…Length not stated
- letter to the editorResearch Papers. There are no arbitrary limits on the length of a paper but the content of the paper must justify its length. The usual range is 6-14 printed pa…Length not stated
- meeting reportsMeeting Reports. These are of relevant specialized meetings.Length not stated
- research or technical notesResearch or Technical Notes. These are reporting techniques or applications which do not require the theoretical underpinning of a full paper.Length not stated
- research paperResearch Papers. There are no arbitrary limits on the length of a paper but the content of the paper must justify its length. The usual range is 6-14 printed pa…Length not stated
- research papersResearch Papers. There are no arbitrary limits on the length of a paper but the content of the paper must justify its length. The usual range is 6-14 printed pa…Length not stated
- review articleResearch Papers. There are no arbitrary limits on the length of a paper but the content of the paper must justify its length. The usual range is 6-14 printed pa…Length not stated
- review articlesReview Articles. Usual limit is up to 30 printed pages or longer if agreed with the editors.Length not stated
- technical noteResearch Papers. There are no arbitrary limits on the length of a paper but the content of the paper must justify its length. The usual range is 6-14 printed pa…Length not stated
Policy excerpts from the journal's websiteAI use, Authorship, Conflicts of interest, Publication ethics, License & copyright, Open access, Peer review, Preprints
- AI use Declaration of generative AI use
Authors must declare the use of generative AI tools in the manuscript preparation process upon submission of the paper.Generative AI and AI-assisted technologies (“AI tools”) have been rapidly adopted in research and scholarly publishing, offering significant benefits while requiring clear standards for responsible and transparent use.Authors preparing a manuscript for this journal may use AI tool…
Source ↗Publisher website ·- Authorship Group authorship
Group authorship refers to the attribution of an article to a defined and named group of authors whose members have contributed to the work. Examples include research consortia, clinical trial groups, collaborative networks, task forces or working groups, expert panels or consensus groups, and participatory research groups. Group authorship must be declared on the title page at submission. When av…
Source ↗Publisher website ·- Conflicts of interest Declaration of competing interests
All authors must disclose any financial and personal relationships with other people or organizations that could inappropriately influence or bias their work. Examples of potential competing interests include:EmploymentConsultanciesStock ownershipHonorariaPaid expert testimonyPatent applications or registrationsGrants or any other fundingAffiliation with the journal as an Editor or Advisory Board …
Source ↗Publisher website ·- Publication ethics
Publishing ethics policy Model summary
Authors must follow ethical guidelines stated in Elsevier's Publishing Ethics Policy.
Source ↗Publisher website ·- License & copyright License options
Authors will be offered open access user license options which will determine how you, and third parties, can reuse your open access article. We advise that you review these options and any funding body license requirements before selecting a license option.
Source ↗Publisher website ·- Open access Open access
We refer you to our open access information page to learn about open access options for this journal.
Source ↗Publisher website ·- Peer review Peer review
Single anonymized review process Model summary
This journal follows a single anonymized review process. Your submission will initially be assessed by our editors. If your submission is deemed suitable, it will typically be sent to be reviewed by a minimum of two reviewers for an independent expert assessment of the scientific quality. The decision as to whether your article is accepted or rejected for publication will be made by our editors.Re…
Source ↗Publisher website ·- Preprints Preprints
Preprint sharing allowed Model summary
Preprint sharingAuthors may share preprints in line with Elsevier's article sharing policy. Sharing preprints, such as on a preprint server, will not count as prior publication.We advise you to read our policy on multiple, redundant or concurrent publication. In support of Open Science, this journal offers its authors a free preprint posting service on SSRN, Elsevier’s preprint and early research …
Source ↗Publisher website ·
Excerpts are quoted from the journal's website; "model summary" lines are written by Workers AI and checked against the text. The journal's website is authoritative.
Profile
Publication details and official links
- Publisher
- Elsevier
- Country or region
- NETHERLANDS
- Language
- English
- Frequency
- Bimonthly
- ISSN
- 1350-4495
- Electronic ISSN
- 1879-0275
- Official links
- Journal homepage ↗OpenAlex
- Submission system ↗Publisher website
- Special issues ↗Publisher website
FAQ
Frequently asked questions about Infrared Physics & Technology
What CAS zone is Infrared Physics & Technology in?
In the 2025 upgraded edition of the CAS Journal Ranking, Infrared Physics & Technology is in Zone 2 of Physics & Astronomy, and in Zone 3 of the minor category Instruments & Instrumentation / Optics / Physics, Applied. In the 2026 Xinrui edition it is in Zone 2 of Physics & Astronomy. Zones from different editions, and from major and minor categories, are not interchangeable.
What is the impact factor of Infrared Physics & Technology?
The latest impact factor listed by LetPub is 3.77; CiteScore 6.5, h-index 103.
How long does peer review take at Infrared Physics & Technology?
The publisher reports about 103 days (submission to acceptance); authors report an average review time of about 3 months; the community-reported acceptance is “Easy (Elsevier website: 36.8%)”. Article statistics cover accepted papers only, publisher figures follow the journal's own definitions, and community reports come from authors' own submissions; none is a promise from the journal.
What are the manuscript requirements of Infrared Physics & Technology?
According to the journal's author guidelines: Abstract: ≤ 250 words; Keywords: 1–7; Reference style: Numbered, in order of citation; Templates: LaTeX; Suggested reviewers: Optional. A model extracted these from the author guidelines and each was checked against the text; check the latest version on the journal's website before submitting.
Where are the editorial board members of Infrared Physics & Technology based?
Of the 34 board members whose country the journal's board page names, 10 (about 29%) are in mainland China; the countries named most often are Mainland China (10), United States (9) and Australia (4). Counted from the institutions listed on the board page; for reference only.
Which databases index Infrared Physics & Technology?
According to LetPub and DOAJ records, Infrared Physics & Technology is indexed in SCIE and Scopus.
Is Infrared Physics & Technology open access, and what is the APC?
Infrared Physics & Technology is a hybrid journal. For open-access publication: APC about USD 3,000.
Sources and updates
The facts on this page come from LetPub, Publisher website, OpenAlex; every figure is tagged with its source and the date it was observed, and conflicting values are kept per source. LetPub source page: view ↗ (archived 2026-08-26). Last updated: .