Journal profile
Covenant Journal of Engineering Technology
ISSN 2682-5317 · eISSN 2682-5325 · Covenant University · Nigeria
Covenant Journal of Engineering Technology: fully open access; no APC; review about 4 weeks (community reports).
The latest issue on the journal's website is from December 2024 (Volume 8, Issue 2): the journal may have stopped publishing or moved platform in the last two years. Check its website before submitting.
Scope
Aims, scope and focus
Covenant Journal of Engineering Technology is published by Covenant University. By OpenAlex counts of its recent articles, its largest topics are Geotechnical and construction materials studies, Multi-Criteria Decision Making and Optimal Power Flow Distribution, together about 23.5% of its articles. Its main subfields are Civil and Structural Engineering and Electrical and Electronic Engineering. (generated from OpenAlex topic counts and CAS ranking data)
CJET is a peer-reviewed, Open Access multidisciplinary engineering journal that publishes original research articles as well as review articles in all areas of engineering technology. It publishes both theoretical and experimental high-quality papers of permanent interest, not previously published in journals, in the field of engineering technology. In addition to peer-reviewed original research papers, the Editorial Board welcomes original research reports, state-of-the-art reviews, and communications in the broadly defined field of engineering science and technology. The journal does not charge fees for article processing. p-ISSN:2682-5317 | e-ISSN: 2682-5325 CJET Publication Ethics and Publication Malpractice Statement Editorial Board Responsibilities Editorial Independence: The editorial board of CJET is responsible for making independent and fair decisions on manuscript selection, review, and publication, regardless of any potential conflicts of interest, race, gender, religion, nationality, or political beliefs. Confidentiality: Editors and reviewers must maintain the confidentiality of submitted manuscripts and refrain from disclosing any information about manuscripts to anyone other than the corresponding author, reviewers, potential reviewers, and the publisher. Fair Review: Manuscripts will be evaluated based on their academic and intellectual content, regardless of the author's race, gender, sexual orientation, religious beliefs, ethnic origin, citizenship, or political philosophy. Publication Decisions: Editors have the sole authority to accept or reject a manuscript. In cases of conflict of interest or questions regarding the quality or accuracy of the work, the editors should consult with the editorial board. Author Responsibilities Originality: Authors must ensure that their work is entirely original and properly cited if they have used the work and/or words of others. Data Access and Retention: Authors may be asked to provide the raw data of their study for editorial review, and they should be prepared to retain such data for a reasonable time after publication. Plagiarism and Citation Manipulation: Authors should not engage in plagiarism or inappropriately manipulate citations. All sources should be properly cited. Authorship: All authors should have made a substantial contribution to the research and should be listed as co-authors. Corresponding authors must ensure that all co-authors have approved the final version of the paper and agree
From the journal's Aims & Scope
Editor-in-chief Oluwarotimi OlofinnadePublisher website
Editorial board by country: none in mainland China; most named Nigeria 10, United States 1, United Kingdom 1, India 1, Canada 1 (17 members with a country) Editorial board ↗Publisher website ·
Main research topics OpenAlex counts of recent articles; shares are approximate
- Geotechnical and construction materials studiesEngineering11.8%
- Multi-Criteria Decision MakingDecision Sciences5.9%
- Optimal Power Flow DistributionEngineering5.9%
- Power Quality and HarmonicsEngineering5.9%
- Aluminum Alloy Microstructure PropertiesEngineering5.9%
- Aluminum Alloys Composites PropertiesEngineering5.9%
- Additive Manufacturing and 3D Printing TechnologiesEngineering5.9%
- Geotechnical Engineering and Soil StabilizationEngineering5.9%
Rankings & indexing
CAS ranking and database indexing
CAS Journal Ranking
CAS Journal Ranking, upgraded edition (March 2025)Not covered
Not covered by this edition.
CAS Xinrui Journal Ranking (March 2026)Not covered
Not covered by this edition.
CAS Journal Ranking, previous upgraded edition (December 2023)Not covered
Not covered by this edition.
Database indexing
Indexed in: no record yet.
International journal early-warning lists: not listed in any editionLetPub
Indexing the journal's website claims
ScopusDOAJPublisher website
Other: Google Scholar
As the journal's website lists them, not checked against each database; for Web of Science editions the records above apply.
Editions, and major and minor categories, are shown separately and never merged into one zone; check which edition your institution uses before you submit or report.
Metrics
Impact metrics and publication volume
Impact
- h-index
- 2OpenAlex ·
- i10-index
- 0OpenAlex ·
- 2-year mean citedness
- 0OpenAlex ·
- Share of gold OA articles
- 0%LetPub ·
Sources count differently and were observed at different times, so each source's own value is kept; "publisher" marks figures from the journal's website.
Review & acceptance
Review time and acceptance
- Average review time (community reports)
- about 4 weeksLetPub ·
- Peer review
- Anonymous peer reviewLetPub
Community reports come from authors' own submissions (confidence 0.5) and are not a promise from the journal; for publisher figures, the journal's own definitions apply.
Fees & open access
APC and open-access policy
Every article is open access; authors usually pay an article processing charge (APC).
| Source | APC | Fee waiver | License | Observed |
|---|---|---|---|---|
| LetPub | No APC | Yes | — | |
| Publisher website | No APC | — | — |
The journal's website is authoritative for fees; sources were observed at different times and each keeps its own value, without averaging.
Submission
Article types and submission policies (journal website)
Article types accepted5
- communicationsthe Editorial Board welcomes original research reports, state-of-the-art reviews and communications in the broadly defined field of engineering science and tech…Length not stated
- original research articlespublishes original research articles as well as review articles in all areas of engineering technologyLength not stated
- original research reportsthe Editorial Board welcomes original research reports, state-of-the-art reviews and communications in the broadly defined field of engineering science and tech…Length not stated
- review articlespublishes original research articles as well as review articles in all areas of engineering technologyLength not stated
- state-of-the-art reviewsthe Editorial Board welcomes original research reports, state-of-the-art reviews and communications in the broadly defined field of engineering science and tech…Length not stated
Policy excerpts from the journal's websiteLicense & copyright, Open access, Peer review, Plagiarism
- License & copyright Copyright Notice
Authors retain copyright of their articles. Model summary
Authors of the articles published in CJET retain the copyright of their articles and are free to reproduce and disseminate their work. For further details see the Covenant Journals Copyright and license agreement.
Source ↗Publisher website ·- Open access Copyright (License) / Open Access
Articles published in the journal are fully Open-Access and distributed under the terms and conditions of the Creative Commons Attribution License (CC BY). The copyright and full publishing rights are retained by the author(s).
Source ↗Publisher website ·- Peer review Peer Review Process
Blind review instructions must be followed for peer-reviewed sections. Model summary
Manuscripts submitted to CJET will generally be reviewed by two (2) anonymous experts in the field. Each author may recommend four (4) experts in the field of study. Authors should be communicated the final decision on their articles within four (4) months of submission. CJET aims for very fast publication and will endeavour to reach a first decision within four (4) weeks.
Source ↗Publisher website ·- Plagiarism
Similarity check: papers must not exceed 20% similarity. Model summary
PERCENTAGE SIMILARITY PAPERS SUBMITTED TO THIS JOURNAL MUST NOT BE MORE THAN 20%
Source ↗Publisher website ·
Excerpts are quoted from the journal's website; "model summary" lines are written by Workers AI and checked against the text. The journal's website is authoritative.
Profile
Publication details and official links
- Publisher
- Covenant University
- Country or region
- Nigeria
- Language
- English
- ISSN
- 2682-5317
- Electronic ISSN
- 2682-5325
- Latest issue on the website
- Volume 8, Issue 2 (December 2024)
- Official links
- Journal homepage ↗LetPub
- Author guidelines ↗LetPub
- Aims & Scope ↗LetPub
- Peer review process ↗LetPub
- Editorial board ↗LetPub
FAQ
Frequently asked questions about Covenant Journal of Engineering Technology
How long does peer review take at Covenant Journal of Engineering Technology?
Authors report an average review time of about 4 weeks. Article statistics cover accepted papers only, publisher figures follow the journal's own definitions, and community reports come from authors' own submissions; none is a promise from the journal.
Where are the editorial board members of Covenant Journal of Engineering Technology based?
Of the 17 board members whose country the journal's board page names, none are in mainland China; the countries named most often are Nigeria (10), United States (1) and United Kingdom (1). Counted from the institutions listed on the board page; for reference only.
Which databases index Covenant Journal of Engineering Technology?
The journal's website lists Scopus and DOAJ; that list has not been checked against each database.
Is Covenant Journal of Engineering Technology open access, and what is the APC?
Covenant Journal of Engineering Technology is a fully open-access journal. It charges no article processing charge.
Sources and updates
The facts on this page come from LetPub, OpenAlex, Publisher website; every figure is tagged with its source and the date it was observed, and conflicting values are kept per source. LetPub source page: view ↗ (archived 2026-08-24). Last updated: .