Journal profile · ENGINEERING, MECHANICAL

Advances in Tribology

ISSN 1687-5915 · eISSN 1687-5923 · Hindawi Limited · United Kingdom

Advances in Tribology: fully open access; APC about USD 950; review about 13 weeks (community reports); 5 articles a year; indexed in Scopus.

Impact factor—No published value
CAS zone—Not in the CAS Journal Ranking
Review timeabout 13 weeksCommunity average
APCUSD 950Fully open access
Acceptance—No reports yet
Articles per year5LetPub annual count

Scope

Aims, scope and focus

Advances in Tribology is published by Hindawi Limited. By OpenAlex counts of its recent articles, its largest topics are Tribology and Lubrication Engineering, Lubricants and Their Additives and Adhesion, Friction, and Surface Interactions, together about 35.9% of its articles. Its main subfields are Mechanical Engineering and Mechanics of Materials. (generated from OpenAlex topic counts and CAS ranking data)

Advances in Tribology publishes papers on the science of friction, wear, and lubrication. Topics covered include investigations into contact mechanics, wear and damage processes, surface and coating engineering, and lubrication technology. Submissions covering all aspects of tribology research are considered, and practical investigations supported by theoretical models are especially welcomed. As well as original research, Advances in Tribology also publishes focused review articles that examine the state of the art, identify emerging trends, and suggest future directions for developing fields.

From the journal's Aims & Scope

Research area (LetPub): ENGINEERING, MECHANICAL

Editorial board by country: none in mainland China; most named India 6, United States 3, South Korea 2, United Kingdom 1, Japan 1 (19 members with a country) Editorial board ↗Publisher website ·

Main research topics OpenAlex counts of recent articles; shares are approximate

  1. Tribology and Lubrication EngineeringEngineering13.5%
  2. Lubricants and Their AdditivesEngineering11.7%
  3. Adhesion, Friction, and Surface InteractionsEngineering10.7%
  4. Tribology and Wear AnalysisEngineering10.5%
  5. Gear and Bearing Dynamics AnalysisEngineering9.6%
  6. Metal and Thin Film MechanicsEngineering4.9%
  7. Advanced materials and compositesEngineering4.9%
  8. Mechanical stress and fatigue analysisEngineering4%

Rankings & indexing

CAS ranking and database indexing

CAS Journal Ranking

CAS Journal Ranking, upgraded edition (March 2025)Not covered

Not covered by this edition.

CAS Xinrui Journal Ranking (March 2026)Not covered

Not covered by this edition.

CAS Journal Ranking, previous upgraded edition (December 2023)Not covered

Not covered by this edition.

Database indexing

ScopusLetPub

International journal early-warning lists: not listed in any editionLetPub

Indexing the journal's website claims

ESCIWeb of ScienceCASDOAJPublisher website

Other: Google Scholar, EBSCO, ProQuest, CNKI, J-Gate

As the journal's website lists them, not checked against each database; for Web of Science editions the records above apply.

Editions, and major and minor categories, are shown separately and never merged into one zone; check which edition your institution uses before you submit or report.

Metrics

Impact metrics and publication volume

Impact

CiteScore 2026-06
5LetPub ·
SJR 2026-06
0.24LetPub ·
SNIP 2026-06
1.31LetPub ·
h-index
28OpenAlex ·
i10-index
98OpenAlex ·
2-year mean citedness
4.13OpenAlex ·
Share of gold OA articles
100%LetPub ·

Volume

Articles per year
5LetPub ·

Articles by year OpenAlex count · 185 in total · the current year is incomplete

YearArticlesOpen accessCitations
20248733
20235528
2022100
20212211

Sources count differently and were observed at different times, so each source's own value is kept; "publisher" marks figures from the journal's website.

Review & acceptance

Review time and acceptance

Average review time (community reports)
about 13 weeksLetPub ·
Peer review
Anonymous peer reviewLetPub

Community reports come from authors' own submissions (confidence 0.5) and are not a promise from the journal; for publisher figures, the journal's own definitions apply.

Fees & open access

APC and open-access policy

Fully open accessLetPub

Every article is open access; authors usually pay an article processing charge (APC).

SourceAPCFee waiverLicenseObserved
OpenAlexUSD 950——
LetPubUSD 925Yes—

The journal's website is authoritative for fees; sources were observed at different times and each keeps its own value, without averaging.

Submission

Article types and submission policies (journal website)

What to prepare3 items from the author guidelines
Abstract
≤ 300 words
Reference style
Chicago
First submission
Free format: the journal's layout is not required
Publisher website · model-extracted, each line checked against the text
Article types accepted7
  1. original researchThe journal will consider the following article types: Research articles Research articles should present the results of an original research study. These manus…Length not stated
  2. research articleThe journal will consider the following article types: Research articles Research articles should present the results of an original research study. These manus…Length not stated
  3. research articlesResearch articles should present the results of an original research study. These manuscripts should describe how the research project was conducted and provide…Length not stated
  4. reviewThe journal will consider the following article types: Research articles Research articles should present the results of an original research study. These manus…Length not stated
  5. review articleThe journal will consider the following article types: Research articles Research articles should present the results of an original research study. These manus…Length not stated
  6. reviewsA review article provides an overview of the published literature in a particular subject area.Length not stated
  7. systematic reviewThe journal will consider the following article types: Research articles Research articles should present the results of an original research study. These manus…Length not stated
Publisher website
Policy excerpts from the journal's websiteAuthorship, Conflicts of interest, Data availability, License & copyright, Open access, Peer review, Preprints, Trial registration / reporting guidelines
Authorship Title and authorship information

The following information should be included: Manuscript title Full author names Full institutional mailing addresses Email addresses Affiliations. The publisher remains neutral with regard to jurisdictional claims in institutional affiliations. Responsibility for affiliations ultimately rests with the author, although the publisher may request changes be made to countries listed in affiliations t…

Source ↗Publisher website ·
Conflicts of interest Conflicts of interest

Concurrent submissions: max three manuscripts under review at once. Model summary

Authors must declare all relevant interests that could be perceived as conflicting. Authors should explain why each interest may represent a conflict. If no conflicts exist, the authors should state this. Submitting authors are responsible for co-authors declaring their interests. Conflicts of interest (COIs, also known as 'competing interests') occur when issues outside research could be reasonab…

Source ↗Publisher website ·
Data availability Data availability

Authors must include a data availability statement with their submission. When submitting a manuscript, submitting authors will be asked to select from several pre-written statements or use the text editor to tell us about data availability with regard to their submission. Review our Data Sharing Policy to understand which data availability statement is right for your submission.

Source ↗Publisher website ·
License & copyright Copyright and permissions

Authors retain the copyright of their manuscripts, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided that the original work is properly cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not speci…

Source ↗Publisher website ·
Open access

Copyright: authors retain copyright; open access articles under CC BY. Model summary

Authors retain the copyright of their manuscripts, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided that the original work is properly cited.

Source ↗Publisher website ·
Peer review Peer review

Peer review model: single-anonymized, for applicable article types. Model summary

The journal follows a single-anonymized peer review model, for applicable article types. Information on the Peer Review model can be found here. Wiley's policy on the confidentiality of the review process is available here. All submitted articles are subject to assessment and peer review to ensure editorial appropriateness and technical correctness. Research published in the journal must be: Scien…

Source ↗Publisher website ·
Preprints Preprints

Preprint policy: preprint-posted articles accepted. Model summary

The journal accepts articles previously published on preprint servers, and does not consider this to compromise the novelty of the results. Articles based on content previously made public only on a preprint server, institutional repository, or in a thesis will be considered. The preprint should be cited.

Source ↗Publisher website ·
Trial registration / reporting guidelines Reporting guidelines

Authors are strongly encouraged to use appropriate reporting guidelines when preparing and submitting manuscripts, to maximize transparency and reproducibility. Our editors and reviewers are also encouraged to use them in the review process. Completed checklists should be provided in the supplementary files on submission. We particularly encourage the use of: CONSORT for randomized controlled tria…

Source ↗Publisher website ·

Excerpts are quoted from the journal's website; "model summary" lines are written by Workers AI and checked against the text. The journal's website is authoritative.

Profile

Publication details and official links

Publisher
Hindawi Limited
Country or region
United Kingdom
Language
English
ISSN
1687-5915
Electronic ISSN
1687-5923
Official links

FAQ

Frequently asked questions about Advances in Tribology

How long does peer review take at Advances in Tribology?

Authors report an average review time of about 13 weeks. Article statistics cover accepted papers only, publisher figures follow the journal's own definitions, and community reports come from authors' own submissions; none is a promise from the journal.

What are the manuscript requirements of Advances in Tribology?

According to the journal's author guidelines: Abstract: ≤ 300 words; Reference style: Chicago; First submission: Free format: the journal's layout is not required. A model extracted these from the author guidelines and each was checked against the text; check the latest version on the journal's website before submitting.

Where are the editorial board members of Advances in Tribology based?

Of the 19 board members whose country the journal's board page names, none are in mainland China; the countries named most often are India (6), United States (3) and South Korea (2). Counted from the institutions listed on the board page; for reference only.

Which databases index Advances in Tribology?

According to LetPub and DOAJ records, Advances in Tribology is indexed in Scopus. The journal's website also lists ESCI, Web of Science, CAS and DOAJ; that list has not been checked against each database.

Is Advances in Tribology open access, and what is the APC?

Advances in Tribology is a fully open-access journal. APC about USD 950.

Sources and updates

The facts on this page come from LetPub, OpenAlex, Publisher website; every figure is tagged with its source and the date it was observed, and conflicting values are kept per source. LetPub source page: view ↗ (archived 2026-08-26). Last updated: .