Journal profile · Engineering-Engineering (miscellaneous)
Advanced Modeling and Simulation in Engineering Sciences
ISSN 2213-7467 · Springer Nature · United Kingdom
Advanced Modeling and Simulation in Engineering Sciences: CAS Zone 3 · Engineering (2025 upgraded edition); impact factor 4.1 (journal website); fully open access; APC about USD 1,890; median 163 days to acceptance (59 articles, last 24 months); 37 articles in 2025; indexed in ESCI and Scopus.
Scope
Aims, scope and focus
Advanced Modeling and Simulation in Engineering Sciences is published by Springer Nature and is in Zone 3 of Engineering in the CAS Journal Ranking (2025 upgraded edition). By OpenAlex counts of its recent articles, its largest topics are Model Reduction and Neural Networks, Numerical methods in engineering and Advanced Numerical Methods in Computational Mathematics, together about 39% of its articles. Its main subfields are Mechanics of Materials. (generated from OpenAlex topic counts and CAS ranking data)
The research topics addressed by Advanced Modeling and Simulation in Engineering Sciences (AMOS) cover the vast domain of the advanced modeling and simulation of materials, processes and structures governed by the laws of mechanics. The emphasis is on advanced and innovative modeling approaches and numerical strategies. The main objective is to describe the actual physics of large mechanical systems with complicated geometries as accurately as possible using complex, highly nonlinear and coupled multiphysics and multiscale models, and then to carry out simulations with these complex models as rapidly as possible. In other words, this research revolves around efficient numerical modeling along with model verification and validation. Therefore, the corresponding papers deal with advanced modeling and simulation, efficient optimization, inverse analysis, data-driven computation and simulation-based control. These challenging issues require multidisciplinary efforts – particularly in modeling, numerical analysis and computer science – which are treated in this journal.
From the journal's Aims & Scope
Research area (LetPub): Engineering-Engineering (miscellaneous)
Editor-in-chief Francisco ChinestaPublisher website
Editorial board by country: 2 in mainland China (about 4%); most named United States 9, France 9, Germany 6, Italy 6, Spain 5 (47 members with a country) Editorial board ↗Publisher website ·
Main research topics OpenAlex counts of recent articles; shares are approximate
- Model Reduction and Neural NetworksPhysics and Astronomy16.5%
- Numerical methods in engineeringEngineering12.1%
- Advanced Numerical Methods in Computational MathematicsEngineering10.5%
- Probabilistic and Robust Engineering DesignDecision Sciences9.9%
- Composite Material MechanicsEngineering5%
- Elasticity and Material ModelingEngineering3.4%
- Numerical methods for differential equationsMathematics3.4%
- Advanced Multi-Objective Optimization AlgorithmsComputer Science3%
Rankings & indexing
CAS ranking and database indexing
CAS Journal Ranking
CAS Journal Ranking, upgraded edition (March 2025)Engineering Zone 3
| Level | Category | Zone |
|---|---|---|
| Major | Engineering | Zone 3 |
| Minor | Mechanics | Zone 3 |
Top journal: noReview journal: no
CAS Xinrui Journal Ranking (March 2026)Engineering Zone 3
| Level | Category | Zone |
|---|---|---|
| Major | Engineering | Zone 3 |
| Minor | Mechanics | Zone 3 |
Top journal: noReview journal: not marked
CAS Journal Ranking, previous upgraded edition (December 2023)Not covered
Not covered by this edition.
Database indexing
ESCIScopusDOAJLetPub
International journal early-warning lists: not listed in any editionLetPub
Indexing the journal's website claims
INSPECDBLPPublisher website
Other: Google Scholar, EBSCO, ProQuest, Dimensions, CNKI, Baidu, ACM Digital Library, Naver, OCLC, Portico, CLOCKSS
As the journal's website lists them, not checked against each database; for Web of Science editions the records above apply.
Editions, and major and minor categories, are shown separately and never merged into one zone; check which edition your institution uses before you submit or report.
Metrics
Impact metrics and publication volume
Impact
- Impact factor (publisher) 2025
- 4.1Publisher website ·
- CiteScore 2026-06
- 5.4LetPub ·
- SJR 2026-06
- 0.79LetPub ·
- SNIP 2026-06
- 1.25LetPub ·
- h-index
- 35OpenAlex ·
- i10-index
- 165OpenAlex ·
- 2-year mean citedness
- 5OpenAlex ·
- Self-citation rate
- 2.4%LetPub ·
- Share of gold OA articles
- 100%LetPub ·
Volume
- Articles per year
- 34LetPub ·
- Downloads per year (publisher) 2025
- 301,100Publisher website ·
Articles by year OpenAlex count · 336 in total · the current year is incomplete
| Year | Articles | Open access | Citations |
|---|---|---|---|
| 2026 | 20 | 20 | 4 |
| 2025 | 37 | 37 | 138 |
| 2024 | 26 | 26 | 273 |
| 2023 | 17 | 17 | 245 |
| 2022 | 24 | 24 | 412 |
| 2021 | 28 | 28 | 325 |
Sources count differently and were observed at different times, so each source's own value is kept; "publisher" marks figures from the journal's website.
Review & acceptance
Review time and acceptance
Review time from article dates manuscript dates registered with Crossref · to
163 daysMedian, submission to acceptance · P25–P75 90 days – 242 days
- Acceptance to online
- median 34 days (59 articles)
- Submission to online
- median 207 days
- Sample
- 59 articles with submission and acceptance dates (61 in the window); the latest was accepted on
Only articles that were accepted and published are counted, not the time spent on rejected manuscripts, so this usually runs longer than a publisher's "time to first decision".
Other sources
- Average review time (community reports)
- about 30 weeksLetPub ·
- Submission to first decision
- 10 daysPublisher website ·
- Submission to publication (journal-reported)
- about 30 weeksDOAJ ·
- Peer review
- Single anonymous peer reviewDOAJ
Community reports come from authors' own submissions (confidence 0.5) and are not a promise from the journal; for publisher figures, the journal's own definitions apply.
Fees & open access
APC and open-access policy
Fully open accessDOAJ
Every article is open access; authors usually pay an article processing charge (APC).
| Source | APC | Fee waiver | License | Observed |
|---|---|---|---|---|
| DOAJ | EUR 1,690 / USD 1,890 / GBP 1,190 | Yes | CC BY, CC BY-NC-ND | |
| OpenAlex | USD 1,890 / EUR 1,690 / GBP 1,190 | — | — | |
| LetPub | GBP 1,140 / USD 1,790 / EUR 1,590 | Yes | — | |
| Publisher website | GBP 1,190 / USD 1,890 / EUR 1,690 | — | — |
The journal's website is authoritative for fees; sources were observed at different times and each keeps its own value, without averaging.
Submission
Article types and submission policies (journal website)
Open calls for papers2, by deadline
Publisher websiteWhat to prepare1 items from the author guidelines
- Suggested reviewers
- Optional
Article types accepted5
- case studiesFormatting guidelines for specific article types can be found below. Research Articles Case Studies Letters to the Editor Review Short ReportsLength not stated
- letters to the editorFormatting guidelines for specific article types can be found below. Research Articles Case Studies Letters to the Editor Review Short ReportsLength not stated
- research articlesFormatting guidelines for specific article types can be found below. Research Articles Case Studies Letters to the Editor Review Short ReportsLength not stated
- reviewFormatting guidelines for specific article types can be found below. Research Articles Case Studies Letters to the Editor Review Short ReportsLength not stated
- short reportsFormatting guidelines for specific article types can be found below. Research Articles Case Studies Letters to the Editor Review Short ReportsLength not stated
Policy excerpts from the journal's websiteData availability, License & copyright, Open access, Peer review
- Data availability Formatting the 'Availability of data and materials' section of your manuscript
Data availability strongly encouraged or required; deposit in public repositories or include in paper/supporting files. Model summary
The following format for the 'Availability of data and materials section of your manuscript should be used:
Source ↗Publisher website ·- License & copyright Licensing and copyright
Open access under CC BY-NC-ND or CC BY licence. Model summary
Creative Commons licences Open access articles in Springer Nature journals are published under Creative Commons licences. These provide an industry-standard framework to support easy re-use of open access material. Under Creative Commons licences, authors retain copyright of their articles. Advanced Modeling and Simulation in Engineering Sciences articles are published open access under a CC BY-NC…
Source ↗Publisher website ·- Open access Benefits of open access
Publishing open access (OA) offers a number of benefits, including greater reach and readership for your work: Cited more 1.6x more citations of OA articles than non-OA articles across all subjects Downloaded more 4x more downloads of OA articles than non-OA articles Greater impact 2.5x more Altmetric attention. OA articles attracted 1.9x more news mentions and 1.2x more policy mentions Open acces…
Source ↗Publisher website ·- Peer review Peer review policy
Peer review is the process used to evaluate the quality of a manuscript before publication. Independent researchers in the relevant field assess submitted manuscripts to check their validity and robustness. Their feedback guides editors in making publication decisions. Typically, two or more experts evaluate each manuscript based on three main criteria: scientific robustness: is the research metho…
Source ↗Publisher website ·
Excerpts are quoted from the journal's website; "model summary" lines are written by Workers AI and checked against the text. The journal's website is authoritative.
Profile
Publication details and official links
- Publisher
- Springer Nature
- Country or region
- United Kingdom
- Language
- English
- ISSN
- 2213-7467
- Official links
- Journal homepage ↗LetPub
- Submission system ↗Publisher website
- Author guidelines ↗LetPub
- Aims & Scope ↗LetPub
- Special issues ↗Publisher website
- APC information ↗DOAJ
- Fee waivers ↗DOAJ
- Open access statement ↗DOAJ
- License & copyright ↗DOAJ
- Peer review process ↗LetPub
- Editorial board ↗LetPub
- Plagiarism policy ↗DOAJ
FAQ
Frequently asked questions about Advanced Modeling and Simulation in Engineering Sciences
What CAS zone is Advanced Modeling and Simulation in Engineering Sciences in?
In the 2025 upgraded edition of the CAS Journal Ranking, Advanced Modeling and Simulation in Engineering Sciences is in Zone 3 of Engineering, and in Zone 3 of the minor category Mechanics. In the 2026 Xinrui edition it is in Zone 3 of Engineering. Zones from different editions, and from major and minor categories, are not interchangeable.
What is the impact factor of Advanced Modeling and Simulation in Engineering Sciences?
The journal's website gives an impact factor of 4.1 (2025); this is the journal's own figure, as LetPub lists none for it; CiteScore 5.4, h-index 35.
How long does peer review take at Advanced Modeling and Simulation in Engineering Sciences?
Based on the dates recorded on 59 articles published between October 2024 and October 2026 (the last 24 months), the median time from submission to acceptance is 163 days (interquartile range 90–242 days); authors report an average review time of about 30 weeks. Article statistics cover accepted papers only, publisher figures follow the journal's own definitions, and community reports come from authors' own submissions; none is a promise from the journal.
Where are the editorial board members of Advanced Modeling and Simulation in Engineering Sciences based?
Of the 47 board members whose country the journal's board page names, 2 (about 4%) are in mainland China; the countries named most often are United States (9), France (9) and Germany (6). Counted from the institutions listed on the board page; for reference only.
Which databases index Advanced Modeling and Simulation in Engineering Sciences?
According to LetPub and DOAJ records, Advanced Modeling and Simulation in Engineering Sciences is indexed in ESCI, Scopus and DOAJ. The journal's website also lists INSPEC and DBLP; that list has not been checked against each database.
Is Advanced Modeling and Simulation in Engineering Sciences open access, and what is the APC?
Advanced Modeling and Simulation in Engineering Sciences is a fully open-access journal. APC about USD 1,890.
Sources and updates
The facts on this page come from LetPub, OpenAlex, DOAJ, Publisher website; every figure is tagged with its source and the date it was observed, and conflicting values are kept per source. LetPub source page: view ↗ (archived 2026-08-26). Last updated: .