期刊档案 · 工程技术-工程：综合
Structural and Multidisciplinary Optimization
ISSN 1615-147X · eISSN 1615-1488 · Springer Berlin Heidelberg · GERMANY · Monthly · 创刊 1989
Structural and Multidisciplinary Optimization 中科院 工程技术 3区（2025 年升级版），影响因子 4.49，混合开放获取，APC 约 3,990 美元，近 24 个月 105 篇文章投稿到接收中位 138 天，录用比例约75%（社区反馈），2025 年发文 274 篇，SCIE、Scopus 收录。
研究范围
研究范围与定位
Structural and Multidisciplinary Optimization 由 Springer Berlin Heidelberg 出版，属中科院工程技术大类（2025 升级版3区）。按 OpenAlex 近年发文统计，该刊主要发表 Topology Optimization in Engineering、Advanced Multi-Objective Optimization Algorithms、Composite Structure Analysis and Optimization 等主题的论文，这 3 个主题约占 54.6%，主导子领域为 Civil and Structural Engineering。（根据 OpenAlex 主题统计与中科院分区数据生成）
Structural and Multidisciplinary Optimization is at the converging frontier of design, engineering, simulation, additive manufacturing, AI and digital-twins. The field has become increasingly important for improving environmental sustainability and combating climate change through enhancing efficiency of engineering products. The journal • explores a wide range of topics dealing with optimization involving at least one major engineering discipline such as solid (structural), fluid, thermal, electric and electronics, electromagnetics etc. • covers multidisciplinary optimization when one discipline deals with a major physical performance listed above. • examines closely related fields that are relevant to design optimization. • is the official journal of the International Society of Structural and Multidisciplinary Optimization (ISSMO) The journal’s scope ranges from mathematical foundations of the field to algorithm and software development, and from benchmark examples to case studies of practical applications in a wide range of industries including automotive, aerospace, rail, AEC (architecture, engineering and construction), mechanical, electrical, chemical, naval and bio-medical. Articles that provide broad educational value are also encouraged. Fields such as computer-aided design and manufacturing, additive manufacturing, digital-twins, AI, system identification and modeling, inverse processes, computer simulation, bio-mechanics, biomedical applications, nanotechnology, electric and electronics systems, MEMS, optics, chemical processes, computational biology, uncertainty quantification, meta-modeling, DOE and active control of engineering products are covered when the topic is closely related to the optimization of structures, fluids or another major physics. Past Editors-in-Chief: George I. N. Rozvany (1989-2015) Raphael T. Haftka (2015-2020)
摘自期刊官网 Aims & Scope
研究方向（LetPub）：工程技术-工程：综合
主编 Ming Zhou出版商官网
编委会国家分布：中国大陆 10 位（约 16%）；主要国家 美国 25、中国 10、韩国 4、法国 4、澳大利亚 3（共 61 位编委标注了国家） 编委会 ↗出版商官网 ·
主要研究主题 OpenAlex 近年发文统计，占比为近似值
- Topology Optimization in EngineeringEngineering24.7%
- Advanced Multi-Objective Optimization AlgorithmsComputer Science16.2%
- Composite Structure Analysis and OptimizationEngineering13.7%
- Probabilistic and Robust Engineering DesignDecision Sciences11.4%
- Structural Analysis and OptimizationEngineering4.2%
- Structural Health Monitoring TechniquesEngineering3.7%
- Composite Material MechanicsEngineering2.7%
- Optimal Experimental Design MethodsDecision Sciences2.7%
分区与收录
学科分区与数据库收录
中科院期刊分区表
期刊分区表（ 2025年3月升级版）工程技术 3 区
| 类别 | 学科 | 分区 |
|---|---|---|
| 大类 | 工程技术 | 3 区 |
| 小类 | 计算机：跨学科应用COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS | 3 区 |
| 小类 | 工程：综合ENGINEERING, MULTIDISCIPLINARY | 3 区 |
| 小类 | 力学MECHANICS | 3 区 |
Top 期刊：否综述期刊：否
《新锐期刊分区表》（ 2026年3月发布）工程技术 3 区
| 类别 | 学科 | 分区 |
|---|---|---|
| 大类 | 工程技术 | 3 区 |
| 小类 | 计算机：跨学科应用COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS | 3 区 |
| 小类 | 工程：综合ENGINEERING, MULTIDISCIPLINARY | 3 区 |
| 小类 | 力学MECHANICS | 2 区 |
Top 期刊：否综述期刊：未标注
期刊分区表（ 2023年12月旧的升级版）工程技术 2 区
| 类别 | 学科 | 分区 |
|---|---|---|
| 大类 | 工程技术 | 2 区 |
| 小类 | 力学MECHANICS | 2 区 |
| 小类 | 计算机：跨学科应用COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS | 3 区 |
| 小类 | 工程：综合ENGINEERING, MULTIDISCIPLINARY | 3 区 |
Top 期刊：否综述期刊：否
数据库收录
SCIEScopusLetPub
国际期刊预警名单：各版本均未列入LetPub
期刊官网自述收录
EI CompendexINSPECCurrent Contents出版商官网
其他：Google Scholar、EBSCO、ProQuest、Dimensions、CNKI、Baidu、ACM Digital Library、Naver、OCLC、Portico、CLOCKSS
期刊官网列出的收录清单，未与各数据库逐一核对；Web of Science 各子库以上方记录为准。
不同版本、大类与小类分别展示，不将不同评价口径合并为一个分区值；投稿与考核前请确认所在机构采用的版本。
指标
影响力指标与发文规模
影响力指标
- 影响因子
- 4.49LetPub ·
- 影响因子（出版商公布） 2025
- 4.5出版商官网 ·
- 五年影响因子（出版商公布） 2025
- 4.8出版商官网 ·
- CiteScore 2026-06
- 7.9LetPub ·
- SJR 2026-06
- 1.07LetPub ·
- SNIP 2026-06
- 1.49LetPub ·
- h-index
- 97LetPub ·
- h-index
- 177OpenAlex ·
- i10-index
- 3,651OpenAlex ·
- 两年平均被引
- 4.59OpenAlex ·
- 自引率
- 11.1%LetPub ·
- Gold OA 文章占比
- 25.81%LetPub ·
发文规模
- 年文章数
- 268LetPub ·
- 年下载量（出版商公布） 2025
- 1,100,000出版商官网 ·
逐年发文量 OpenAlex 统计 · 累计 5,675 篇 · 当年数据不完整
| 年份 | 发文量 | 其中 OA | 被引 |
|---|---|---|---|
| 2026 | 207 | 87 | 118 |
| 2025 | 274 | 98 | 1,104 |
| 2024 | 224 | 78 | 2,014 |
| 2023 | 243 | 77 | 3,316 |
| 2022 | 352 | 99 | 6,608 |
| 2021 | 334 | 96 | 8,225 |
不同来源的统计口径与观测时间不同，页面保留各来源原值；“出版商公布”为期刊官网自述数据。
审稿与录用
审稿周期与录用情况
文章统计的审稿周期 Crossref 登记的稿件日期 · 至
138 天投稿到接收中位数 · P25–P75 111 天 – 184 天
- 接收到上线
- 中位数 34 天（105 篇）
- 投稿到上线
- 中位数 178 天
- 样本
- 105 篇有投稿与接收日期的文章（窗口内共 533 篇），最近一篇接收于
只统计最终被录用并发表的文章，不含被拒稿件的处理时间，因此通常长于出版商公布的"首次决定时间"。
其他来源
- 平均审稿速度（社区反馈）
- 平均3.0个月LetPub ·
- 平均录用比例（社区反馈）
- 75%LetPub ·
- 投稿到首次决定
- 10 天出版商官网 ·
- 评审方式
- 单盲同行评审、双盲同行评审出版商官网
社区反馈来自投稿者样本，置信度 0.5，不代表期刊承诺；“出版商公布”的时间节点定义以官网为准。
费用与开放获取
版面费与开放获取政策
混合开放获取LetPub
订阅期刊，作者可付费选择开放获取发表。
| 来源 | 文章处理费 | 费用减免 | 许可证 | 观测时间 |
|---|---|---|---|---|
| OpenAlex | USD 3,990 / EUR 2,990 / GBP 2,590 | — | — |
混合期刊的文章处理费仅在作者选择开放获取发表时收取；按订阅方式发表通常不收费。
费用以期刊官网为准；不同来源的观测时间可能不同，页面保留各来源原值，不做平均。
投稿要求
文章类型与投稿政策（官网）
投稿准备要点4 项，摘自作者指南
- 摘要
- 150–250 词
- 关键词
- ≥ 4 个
- 参考文献格式
- 著者-出版年制
- 推荐审稿人
- 可选
接收的文章类型10 种
- benchmark case studiesBenchmark case studies contain solutions for a set of problems, which are suitable for testing new methods in future resarch papers未说明篇幅
- book reviewsBook Reviews must present a comprehensive, balanced and critical review of a book in a field related to the scope of the journal.未说明篇幅
- brief notesBrief Notes must not exceed 4 journal pages, and may describe a preliminary report on ideas and results of major importance.未说明篇幅
- discussionsDiscussions represent constructive and meaningful comments and criticisms on any publication in the journal, submitted within twelve months of the appearance of…未说明篇幅
- editorialSingle-blind peer review This journal follows a single-blind reviewing procedure. This journal also publishes special/guest-edited issues. The peer review proce…未说明篇幅
- educational articlesEducational Articles contain information which is likely to be used in teaching methods of structural and multidisciplinary optimization.未说明篇幅
- industrial applicationsIndustrial Applications describe practical but challenging applications of structural and multidisciplinary optimization.未说明篇幅
- issmo newsISSMO News report on events relevant to the International Society of Structural and Multidisciplinary Optimization.未说明篇幅
- research papersResearch Papers must describe original results of research, including an abstract, an introduction with a literature survey, formulation, derivations and/or alg…未说明篇幅
- review articlesReview Articles must represent a comprehensive overview of an entire field and preferably should not exceed 18 journal pages whichmust include an exhaustive lit…未说明篇幅
官网政策摘录AI 使用、作者资格、利益冲突、数据可用性、出版伦理、许可与版权、开放获取、同行评审
- AI 使用 Generative AI Images
Please check Springer’s policy on generative AI images and make sure your work adheres to the principles described therein. Back to top
原文 ↗出版商官网 ·- 作者资格 Authorship principles
4-6 keywords required 模型摘要
These guidelines describe authorship principles and good authorship practices to which prospective authors should adhere to. Authorship clarified The Journal and Publisher assume all authors agreed with the content and that all gave explicit consent to submit and that they obtained consent from the responsible authorities at the institute/organization where the work has been carried out, before th…
原文 ↗出版商官网 ·- 利益冲突 Disclosures and declarations
All authors are requested to include information regarding sources of funding, financial or non-financial interests, study-specific approval by the appropriate ethics committee for research involving humans and/or animals, informed consent if the research involved human participants, and a statement on welfare of animals if the research involved animals (as appropriate). The decision whether such …
原文 ↗出版商官网 ·- 数据可用性 Data availability statements
All original research must include a data availability statement. This statement should explain how to access data supporting the results and analysis in the article, including links/citations to publicly archived datasets analysed or generated during the study. Please see our full policy here. If it is not possible to share research data publicly, for instance when individual privacy could be com…
原文 ↗出版商官网 ·- 出版伦理 Compliance with Ethical Standards
Originality and exclusivity declaration 模型摘要
To ensure objectivity and transparency in research and to ensure that accepted principles of ethical and professional conduct have been followed, authors should include information regarding sources of funding, potential conflicts of interest (financial or non-financial), informed consent if the research involved human participants, and a statement on welfare of animals if the research involved an…
原文 ↗出版商官网 ·- 许可与版权 Copyright
Permissions required for previously published material 模型摘要
Open Choice articles do not require transfer of copyright as the copyright remains with the author. In opting for open access, the author(s) agree to publish the article under a Creative Commons license. Details of the OA licences offered to authors can be found on the individual journal website, in the journal's How to publish with us guide. Back to top
原文 ↗出版商官网 ·- 开放获取 Open access publishing
To find out more about publishing your work Open Access in Structural and Multidisciplinary Optimization, including information on fees, funding and licences, visit our Open access publishing page. Back to top
原文 ↗出版商官网 ·- 同行评审 Single-blind peer review
Single-blind peer review 模型摘要
This journal follows a single-blind reviewing procedure. This journal also publishes special/guest-edited issues. The peer review process for these articles is the same as the peer review process of the journal in general. Additionally, if a guest editor authors an article in their issue/collection, they will not handle the peer review process.
原文 ↗出版商官网 ·
摘录来自期刊官网页面，仅保留原文片段；“模型摘要”由 Workers AI 生成并经原文校验，以官网为准。
基本信息
出版信息与官方入口
- 出版商
- Springer Berlin Heidelberg
- 出版国家或地区
- GERMANY
- 出版语言
- English
- 出版周期
- Monthly
- 创刊年份
- 1989
- ISSN
- 1615-147X
- 电子版 ISSN
- 1615-1488
- 学会 / 主办单位
- International Society of Structural and Multidisciplinary Optimization
- 官方链接
- 期刊主页 ↗OpenAlex
- 投稿系统 ↗出版商官网
- 作者指南 ↗LetPub
- 专刊 / 特刊征稿 ↗出版商官网
常见问题
关于 Structural and Multidisciplinary Optimization 的常见问题
Structural and Multidisciplinary Optimization 是中科院几区期刊？
2025 年升级版分区表中，Structural and Multidisciplinary Optimization 为工程技术 3区，小类 计算机：跨学科应用 / 工程：综合 / 力学 3 区。2026 年新锐版分区表中为工程技术 3区。不同版本与大小类分区不能混用。
Structural and Multidisciplinary Optimization 的影响因子是多少？
LetPub 汇总的最新公布影响因子为 4.49，CiteScore 为 7.9，h-index 为 177。
Structural and Multidisciplinary Optimization 的审稿周期多长？
按 2024年10月至2026年10月（近 24 个月）105 篇已发表文章登记的日期，投稿到接收的中位数为 138 天（四分位 111–184 天）；投稿社区反馈的平均审稿速度为约 3 个月，平均录用比例反馈为“约75%”。文章统计只含被录用的稿件，出版商数据口径以官网为准，社区反馈来自投稿者样本，均不代表期刊承诺。
Structural and Multidisciplinary Optimization 的投稿格式要求是什么？
据期刊作者指南：摘要：150–250 词；关键词：≥ 4 个；参考文献格式：著者-出版年制；推荐审稿人：可选。以上由模型从作者指南提取并逐项与原文核对，投稿前请以官网最新版本为准。
Structural and Multidisciplinary Optimization 的编委会里有中国学者吗？
期刊官网编委会页面上标注了国家的 61 位编委中，中国大陆 10 位（约 16%）；人数最多的国家是 美国（25 位）、中国（10 位）、韩国（4 位）。统计按编委会页面列出的机构国家计，仅供参考。
Structural and Multidisciplinary Optimization 被哪些数据库收录？
据 LetPub 与 DOAJ 记录，Structural and Multidisciplinary Optimization 被 SCIE、Scopus 收录。期刊官网自述还被 EI Compendex、INSPEC、Current Contents 收录，该清单未与各数据库逐一核对。
Structural and Multidisciplinary Optimization 是开放获取期刊吗？版面费多少？
Structural and Multidisciplinary Optimization 为混合开放获取。选择开放获取发表时APC 约 3,990 美元。
来源与更新
本页事实来自 LetPub、OpenAlex、出版商官网；每个数字旁标注来源与观测日期，冲突数据保留各来源原值。LetPub 原始详情页：查看 ↗（2026-08-26 归档）。最近更新：。