期刊档案 · THERMODYNAMICSCONSTRUCTION & BUILDING TECH-CONSTRUCTION & BUILDING TECHNOLOGY
Science and Technology for the Built Environment
ISSN 2374-4731 · eISSN 2374-474X · Taylor and Francis Ltd. · UNITED STATES
Science and Technology for the Built Environment 中科院 工程技术 4区(2025 年升级版),影响因子 1.75,混合开放获取,收取 APC,金额未公布,近 24 个月 91 篇文章投稿到接收中位 216 天,2025 年发文 72 篇,SCIE、Scopus 收录。
研究范围
研究范围与定位
Science and Technology for the Built Environment 由 Taylor and Francis Ltd. 出版,属中科院工程技术大类(2025 升级版4区)。按 OpenAlex 近年发文统计,该刊主要发表 Building Energy and Comfort Optimization、Refrigeration and Air Conditioning Technologies、Heat Transfer and Optimization 等主题的论文,这 3 个主题约占 42.8%,主导子领域为 Mechanical Engineering。(根据 OpenAlex 主题统计与中科院分区数据生成)
Science and Technology for the Built Environment, ASHRAE's archival research publication offers comprehensive reporting of original research in science and technology related to the stationary and mobile built environment, including Indoor environmental quality, occupant health, comfort, and productivity Heating, ventilation, air conditioning, and refrigeration (HVAC&R) and related technologies Thermodynamic and energy system dynamics, controls, optimization, fault detection and diagnosis, smart systems, and building demand-side management Experiments and analysis related to material properties, underlying thermodynamics, refrigerants, fluid dynamics, airflow, and heat and mass transfer Renewable and traditional energy systems and related processes and concepts Integrated built environmental system design approaches and tools Novel simulation approaches and algorithms and validated simulations Building enclosure materials, assemblies, and systems for minimizing and/or regulating space heating and cooling modes Review articles that critically assess existing literature and point out future research directions Only works reporting on research that is original and of lasting value are accepted for publication. This journal is included in the Web of Science and Current Contents Connect databases. All submitted manuscripts are subject to initial appraisal by the Editor, and, if found suitable for further consideration, to peer review by independent, anonymous expert referees. All peer review is double anonymized. Science and Technology for the Built Environment is published by Taylor & Francis Group on behalf of ASHRAE, a global society advancing human well-being through sustainable technology for the built environment. Science and Technology for the Built Environment is available online, as a printed volume published twice a year and through "Open Select" offered by Taylor & Francis. ASHRAE and Taylor and Francis aim to expand the global reach and readership, to achieve the highest possible levels of accessibility through rapid review and publication process, and to improve access to previously published articles. Publication Office: Taylor & Francis Group, 530 Walnut Street, Philadelphia, PA 19106.
摘自期刊官网 Aims & Scope
研究方向(LetPub):THERMODYNAMICSCONSTRUCTION & BUILDING TECH-CONSTRUCTION & BUILDING TECHNOLOGY
主编 JEFFREY D. SPITLER出版商官网
主要研究主题 OpenAlex 近年发文统计,占比为近似值
- Building Energy and Comfort OptimizationEngineering22.8%
- Refrigeration and Air Conditioning TechnologiesEngineering11.1%
- Heat Transfer and OptimizationEngineering8.9%
- Wind and Air Flow StudiesEnvironmental Science7.5%
- Infection Control and VentilationMedicine6.1%
- Heat Transfer and Boiling StudiesEngineering5.6%
- Adsorption and Cooling SystemsEngineering5.1%
- Urban Heat Island MitigationEnvironmental Science4.3%
分区与收录
学科分区与数据库收录
中科院期刊分区表
期刊分区表( 2025年3月升级版)工程技术 4 区
| 类别 | 学科 | 分区 |
|---|---|---|
| 大类 | 工程技术 | 4 区 |
| 小类 | 结构与建筑技术CONSTRUCTION & BUILDING TECHNOLOGY | 4 区 |
| 小类 | 工程:机械ENGINEERING, MECHANICAL | 4 区 |
| 小类 | 热力学THERMODYNAMICS | 4 区 |
Top 期刊:否综述期刊:否
《新锐期刊分区表》( 2026年3月发布)工程技术 4 区
| 类别 | 学科 | 分区 |
|---|---|---|
| 大类 | 工程技术 | 4 区 |
| 小类 | 热力学THERMODYNAMICS | 4 区 |
| 小类 | 结构与建筑技术CONSTRUCTION & BUILDING TECHNOLOGY | 4 区 |
| 小类 | 工程:机械ENGINEERING, MECHANICAL | 4 区 |
Top 期刊:否综述期刊:未标注
期刊分区表( 2023年12月旧的升级版)工程技术 4 区
| 类别 | 学科 | 分区 |
|---|---|---|
| 大类 | 工程技术 | 4 区 |
| 小类 | 结构与建筑技术CONSTRUCTION & BUILDING TECHNOLOGY | 4 区 |
| 小类 | 工程:机械ENGINEERING, MECHANICAL | 4 区 |
| 小类 | 热力学THERMODYNAMICS | 4 区 |
Top 期刊:否综述期刊:否
期刊官网公布的 JCR / CiteScore 分区
- CiteScore Q2 · 2025 年度
出版商自述数据,JCR 以 Clarivate、CiteScore 以 Scopus 公布为准;与中科院分区是不同体系。出版商官网
数据库收录
SCIEScopusLetPub
国际期刊预警名单:各版本均未列入LetPub
期刊官网自述收录
Web of Science出版商官网
期刊官网列出的收录清单,未与各数据库逐一核对;Web of Science 各子库以上方记录为准。
不同版本、大类与小类分别展示,不将不同评价口径合并为一个分区值;投稿与考核前请确认所在机构采用的版本。
指标
影响力指标与发文规模
影响力指标
- 影响因子
- 1.75LetPub ·
- 影响因子(出版商公布) 2025
- 1.7出版商官网 ·
- 五年影响因子(出版商公布) 2025
- 1.9出版商官网 ·
- CiteScore 2026-06
- 3.3LetPub ·
- CiteScore(出版商公布) 2025
- 3.3出版商官网 ·
- SJR 2026-06
- 0.42LetPub ·
- SJR(出版商公布) 2025
- 0.42出版商官网 ·
- SNIP 2026-06
- 0.67LetPub ·
- SNIP(出版商公布) 2025
- 0.67出版商官网 ·
- h-index
- 51LetPub ·
- h-index
- 85OpenAlex ·
- i10-index
- 1,065OpenAlex ·
- 两年平均被引
- 1.71OpenAlex ·
- 自引率
- 5.9%LetPub ·
- Gold OA 文章占比
- 12.79%LetPub ·
发文规模
- 年文章数
- 69LetPub ·
- 年下载量(出版商公布)
- 122,000出版商官网 ·
- 年下载量(出版商公布) 2024
- 122,000出版商官网 ·
逐年发文量 OpenAlex 统计 · 累计 2,226 篇 · 当年数据不完整
| 年份 | 发文量 | 其中 OA | 被引 |
|---|---|---|---|
| 2026 | 75 | 21 | 15 |
| 2025 | 72 | 15 | 127 |
| 2024 | 80 | 25 | 247 |
| 2023 | 73 | 26 | 412 |
| 2022 | 81 | 25 | 620 |
| 2021 | 93 | 27 | 955 |
不同来源的统计口径与观测时间不同,页面保留各来源原值;“出版商公布”为期刊官网自述数据。
审稿与录用
审稿周期与录用情况
文章统计的审稿周期 Crossref 登记的稿件日期 · 至
216 天投稿到接收中位数 · P25–P75 157 天 – 284 天
- 接收到上线
- 中位数 42 天(91 篇)
- 投稿到上线
- 中位数 267 天
- 样本
- 91 篇有投稿与接收日期的文章(窗口内共 160 篇),最近一篇接收于
只统计最终被录用并发表的文章,不含被拒稿件的处理时间,因此通常长于出版商公布的"首次决定时间"。
其他来源
- 投稿到首次决定
- 5 天出版商官网 ·
- 接收到发表
- 43 天出版商官网 ·
- 评审方式
- 双盲同行评审出版商官网
社区反馈来自投稿者样本,置信度 0.5,不代表期刊承诺;“出版商公布”的时间节点定义以官网为准。
费用与开放获取
版面费与开放获取政策
订阅期刊,作者可付费选择开放获取发表。
| 来源 | 文章处理费 | 费用减免 | 许可证 | 观测时间 |
|---|---|---|---|---|
| 出版商官网 | 有,金额未公布 | — | — |
混合期刊的文章处理费仅在作者选择开放获取发表时收取;按订阅方式发表通常不收费。
费用以期刊官网为准;不同来源的观测时间可能不同,页面保留各来源原值,不做平均。
投稿要求
文章类型与投稿政策(官网)
官网政策摘录开放获取、同行评审
- 开放获取 Open access
该期刊是Taylor & Francis Open Select出版计划下的混合开放获取期刊,作者可选择开放获取发表,文章在出版后即可免费在线获取,从而提高可见度、读者群和影响力。 模型中文摘要
Science and Technology for the Built Environment is a hybrid open access journal that is part of the Taylor & Francis Open Select publishing program, giving you the option to publish open access. Publishing open access means that your article will be free to access online immediately on publication, increasing the visibility, readership, and impact of your research. Why choose open access? Increas…
原文 ↗出版商官网 ·- 同行评审
只有报告具有原创性和持久价值的研究的论文才会被接受发表。 模型中文摘要
Only works reporting on research that is original and of lasting value are accepted for publication.
原文 ↗出版商官网 ·
摘录来自期刊官网页面,仅保留原文片段;“模型摘要”由 Workers AI 生成并经原文校验,以官网为准。
基本信息
出版信息与官方入口
- 出版商
- Taylor and Francis Ltd.
- 出版国家或地区
- UNITED STATES
- 出版语言
- English
- ISSN
- 2374-4731
- 电子版 ISSN
- 2374-474X
- 学会 / 主办单位
- ASHRAE
- 官网最新一期
- Volume 32, Issue 7(2026 年)
- 官方链接
- 期刊主页 ↗OpenAlex
- 投稿系统 ↗出版商官网
- 专刊 / 特刊征稿 ↗出版商官网
常见问题
关于 Science and Technology for the Built Environment 的常见问题
Science and Technology for the Built Environment 是中科院几区期刊?
2025 年升级版分区表中,Science and Technology for the Built Environment 为工程技术 4区,小类 结构与建筑技术 / 工程:机械 / 热力学 4 区。2026 年新锐版分区表中为工程技术 4区。不同版本与大小类分区不能混用。
Science and Technology for the Built Environment 的影响因子是多少?
LetPub 汇总的最新公布影响因子为 1.75,CiteScore 为 3.3,h-index 为 85。
Science and Technology for the Built Environment 的审稿周期多长?
按 2024年10月至2026年10月(近 24 个月)91 篇已发表文章登记的日期,投稿到接收的中位数为 216 天(四分位 157–284 天)。文章统计只含被录用的稿件,出版商数据口径以官网为准,社区反馈来自投稿者样本,均不代表期刊承诺。
Science and Technology for the Built Environment 被哪些数据库收录?
据 LetPub 与 DOAJ 记录,Science and Technology for the Built Environment 被 SCIE、Scopus 收录。期刊官网自述还被 Web of Science 收录,该清单未与各数据库逐一核对。
Science and Technology for the Built Environment 是开放获取期刊吗?版面费多少?
Science and Technology for the Built Environment 为混合开放获取。选择开放获取发表时收取 APC,金额未公布。
来源与更新
本页事实来自 LetPub、出版商官网、OpenAlex;每个数字旁标注来源与观测日期,冲突数据保留各来源原值。LetPub 原始详情页:查看 ↗(2026-08-25 归档)。最近更新:。