期刊档案 · Materials Science-General Materials Science
Advanced Materials Technologies
ISSN 2365-709X · Wiley-Blackwell · United States
Advanced Materials Technologies 中科院 材料科学 3区(2025 年升级版),影响因子 5.68,混合开放获取,APC 约 4,680 美元,近 24 个月 105 篇文章投稿到接收中位 119 天,官网公布录用率 33%,2025 年发文 1,010 篇,SCIE、Scopus 收录。
研究范围
研究范围与定位
Advanced Materials Technologies 由 Wiley-Blackwell 出版,属中科院材料科学大类(2025 升级版3区)。按 OpenAlex 近年发文统计,该刊主要发表 Advanced Sensor and Energy Harvesting Materials、Conducting polymers and applications、Advanced Materials and Mechanics 等主题的论文,这 3 个主题约占 41.8%,主导子领域为 Biomedical Engineering。(根据 OpenAlex 主题统计与中科院分区数据生成)
The Advanced Portfolio from Wiley is a family of globally respected, high-impact journals publishing cutting-edge science.
摘自期刊官网 Aims & Scope
研究方向(LetPub):Materials Science-General Materials Science
主编 Marco Squillaci出版商官网
主要研究主题 OpenAlex 近年发文统计,占比为近似值
- Advanced Sensor and Energy Harvesting MaterialsEngineering25%
- Conducting polymers and applicationsMaterials Science10.1%
- Advanced Materials and MechanicsEngineering6.6%
- Additive Manufacturing and 3D Printing TechnologiesEngineering4.6%
- Tactile and Sensory InteractionsNeuroscience4.5%
- Nanomaterials and Printing TechnologiesEngineering4.1%
- 3D Printing in Biomedical ResearchEngineering3.9%
- Gas Sensing Nanomaterials and SensorsEngineering3.8%
分区与收录
学科分区与数据库收录
中科院期刊分区表
期刊分区表( 2025年3月升级版)材料科学 3 区
| 类别 | 学科 | 分区 |
|---|---|---|
| 大类 | 材料科学 | 3 区 |
| 小类 | 材料科学:综合MATERIALS SCIENCE, MULTIDISCIPLINARY | 3 区 |
Top 期刊:否综述期刊:否
《新锐期刊分区表》( 2026年3月发布)材料科学 3 区
| 类别 | 学科 | 分区 |
|---|---|---|
| 大类 | 材料科学 | 3 区 |
| 小类 | 材料科学:综合MATERIALS SCIENCE, MULTIDISCIPLINARY | 3 区 |
Top 期刊:否综述期刊:未标注
期刊分区表( 2023年12月旧的升级版)材料科学 3 区
| 类别 | 学科 | 分区 |
|---|---|---|
| 大类 | 材料科学 | 3 区 |
| 小类 | 材料科学:综合MATERIALS SCIENCE, MULTIDISCIPLINARY | 3 区 |
Top 期刊:否综述期刊:否
数据库收录
SCIEScopusLetPub
国际期刊预警名单:各版本均未列入LetPub
不同版本、大类与小类分别展示,不将不同评价口径合并为一个分区值;投稿与考核前请确认所在机构采用的版本。
指标
影响力指标与发文规模
影响力指标
- 影响因子
- 5.68LetPub ·
- 影响因子(出版商公布)
- 6出版商官网 ·
- CiteScore 2026-06
- 11.7LetPub ·
- CiteScore(出版商公布)
- 11.7出版商官网 ·
- SJR 2026-06
- 1.43LetPub ·
- SNIP 2026-06
- 1.15LetPub ·
- h-index
- 18LetPub ·
- h-index
- 133OpenAlex ·
- i10-index
- 2,963OpenAlex ·
- 两年平均被引
- 4.89OpenAlex ·
- 自引率
- 3.3%LetPub ·
- Gold OA 文章占比
- 34.55%LetPub ·
发文规模
- 年文章数
- 865LetPub ·
逐年发文量 OpenAlex 统计 · 累计 6,558 篇 · 当年数据不完整
| 年份 | 发文量 | 其中 OA | 被引 |
|---|---|---|---|
| 2026 | 713 | 335 | 529 |
| 2025 | 1,010 | 573 | 3,894 |
| 2024 | 890 | 576 | 8,342 |
| 2023 | 961 | 622 | 14,983 |
| 2022 | 672 | 238 | 16,161 |
| 2021 | 641 | 210 | 20,426 |
不同来源的统计口径与观测时间不同,页面保留各来源原值;“出版商公布”为期刊官网自述数据。
审稿与录用
审稿周期与录用情况
文章统计的审稿周期 Crossref 登记的稿件日期 · 至
119 天投稿到接收中位数 · P25–P75 82 天 – 157 天
- 接收到上线
- 中位数 10 天(105 篇)
- 投稿到上线
- 中位数 128 天
- 样本
- 105 篇有投稿与接收日期的文章(窗口内共 1,872 篇),最近一篇接收于
只统计最终被录用并发表的文章,不含被拒稿件的处理时间,因此通常长于出版商公布的"首次决定时间"。
其他来源
- 录用率(出版商公布)
- 33%出版商官网 ·
- 投稿到首次决定
- 19 天出版商官网 ·
- 评审方式
- 单盲同行评审出版商官网
社区反馈来自投稿者样本,置信度 0.5,不代表期刊承诺;“出版商公布”的时间节点定义以官网为准。
费用与开放获取
版面费与开放获取政策
订阅期刊,作者可付费选择开放获取发表。
| 来源 | 文章处理费 | 费用减免 | 许可证 | 观测时间 |
|---|---|---|---|---|
| OpenAlex | USD 4,680 / EUR 3,860 / GBP 3,110 | — | — |
混合期刊的文章处理费仅在作者选择开放获取发表时收取;按订阅方式发表通常不收费。
费用以期刊官网为准;不同来源的观测时间可能不同,页面保留各来源原值,不做平均。
投稿要求
文章类型与投稿政策(官网)
投稿准备要点6 项,摘自作者指南
- 摘要
- ≤ 200 词
- 关键词
- ≥ 3 个
- 参考文献格式
- 著者-出版年制
- 稿件模板
- 提供 LaTeX 与 Word 模板
- 首次投稿格式
- 允许不按期刊格式排版(free format)
- 投稿信(Cover letter)
- 必须提供
接收的文章类型3 种,含篇幅限制
- perspectivePerspectives are peer-reviewed and provide a forum to present personal opinions and backgrounds on topics of interest to national and international research com…正文 ≤ 200 词 · 摘要 ≤ 200 词
- research articleX manuscript template. Whilst a typical Research Article is around 3000–8000 words (in its entirety) including 3–8 display items (figures, sch正文 ≤ 8,000 词
- reviewReviews are peer-reviewed and give an overview of recent progress in important fields of research, providing the readers with a guide to the relevant literature…摘要 ≤ 200 词 · 图表 ≤ 15
官网政策摘录AI 使用、作者资格、利益冲突、数据可用性、出版伦理、开放获取、同行评审、查重、预印本
- AI 使用 AI-Generated Images
关于在作品中使用AI生成图像的信息,请参阅Wiley面向研究人员的AI指南。 模型中文摘要
For information about using AI-generated images in your work, please see Wiley’s AI Guidelines for Researchers.
原文 ↗出版商官网 ·- 作者资格 Authorship
作者名单应准确反映对工作有贡献的人员;所有列名作者须符合以下标准:对研究的构思与设计、数据获取、分析或解释作出实质性贡献;参与撰写稿件或对其重要学术内容进行批判性修改;批准最终发表版本;每位作者应充分参与工作,对相应内容承担公共责任,并同意…… 模型中文摘要
The list of authors should accurately indicate who contributed to the work. All those listed as authors should qualify for authorship according to the following criteria: Have made substantial contributions to conception and design, or acquisition of data, or analysis and interpretation of data; Been involved in drafting the manuscript or revising it critically for important intellectual content; …
原文 ↗出版商官网 ·- 利益冲突 Conflict of Interest
所有作者必须声明财务/商业利益冲突;如无利益冲突,也应予以说明。 模型中文摘要
All authors must declare financial/commercial conflicts of interest. If the authors have no conflicts of interest, this should be stated. top ↑
原文 ↗出版商官网 ·- 数据可用性 Data Sharing/Repositories
Wiley致力于更开放的研究环境,通过促进数据、方法与报告标准的可重复性和验证来加快研究发现;鼓励作者共享研究数据(包括但不限于原始数据、处理后的数据、软件、算法、协议、方法和材料),并期望支持主要研究结果的数据存入适当的公共存储库;作者须提供数据可用性声明,说明数据的可用性或缺失…… 模型中文摘要
Wiley is committed to a more open research landscape, facilitating faster and more effective research discovery by enabling reproducibility and verification of data, methodology and reporting standards. We encourage authors of published articles to share their research data including, but not limited to: raw data, processed data, software, algorithms, protocols, methods, and materials. We expect t…
原文 ↗出版商官网 ·- 出版伦理 Professional Conduct and Publication Ethics
该期刊致力于对所有发表材料保持专业操守和道德行为的高标准;《出版伦理指南》阐述了期刊作为科学出版商的立场;期刊支持国际纯物理与应用物理联盟采用的《科学出版伦理行为国际指南》(IUPAP)、出版伦理委员会(COPE)指南,以及世界科研诚信大会发布的《新加坡科研诚信声明》;因此,作者、审稿人…… 模型中文摘要
The journal is committed to high standards for professional conduct and ethical behavior in all published material. The Publishing Ethics Guidelines detail the journal's position as a scientific publisher. Furthermore, the journal supports the International Guidelines for Ethical Conduct in Scientific Publishing (IUPAP) as they were adopted by the International Union of Pure and Applied Physics, t…
原文 ↗出版商官网 ·- 开放获取 Open Access
一般规则的例外是开放获取期刊和文章,其材料再使用受不同协议约束;如需复制开放获取出版物中的材料,应查阅期刊主页了解其再使用政策;CC-BY内容无需征得许可即可使用,但必须注明来源;在“非商业”(NC)、“禁止演绎”(ND)或“相同方式共享”(SA)等要求下以知识共享许可发布的内容…… 模型中文摘要
A general exception to this rule is open access journals and articles, which have different agreements governing re-use of material. If you wish to reproduce materials from an open access title, you should check the journal homepage for more information on their re-use policies. CC-BY content can be used without asking permission, but the source must be attributed. Reproduced under terms of the CC…
原文 ↗出版商官网 ·- 同行评审 Peer Review Policy
所有稿件均须接受编辑评估和/或同行评审;首次评估很少直接接受,但例外情况下有可能;编辑在此阶段会因稿件原创性不足、存在严重科学缺陷、语言需大幅改进或不符合期刊宗旨与范围而拒稿;对期刊读者具有潜在兴趣的稿件将送正式评审;所有稿件的评审流程由专业内部编辑处理;稿件…… 模型中文摘要
All manuscripts are subject to assessment by the editors and/or peer review. The first evaluation of a manuscript rarely results in acceptance, but it is possible in exceptional cases. Manuscripts are rejected by the editors at this stage if they are insufficiently original, have serious scientific flaws, need extensive improvement in the language, or do not fall within the aims and scope of the j…
原文 ↗出版商官网 ·- 查重
所有稿件在接受前都将使用抄袭检测软件进行检测。 模型中文摘要
All manuscripts will be subject to testing using plagiarism detection software prior to acceptance.
原文 ↗出版商官网 ·- 预印本
此前已在非营利社区预印本服务器(如ChemRxiv、bioRxiv和arXiv)上发布为预印本的投稿论文将被考虑。 模型中文摘要
Consideration will be given to submitted papers that have been previously: posted as a preprint on a non-profit community preprint server such as ChemRxiv, bioRxiv, and arXiv.
原文 ↗出版商官网 ·
摘录来自期刊官网页面,仅保留原文片段;“模型摘要”由 Workers AI 生成并经原文校验,以官网为准。
基本信息
出版信息与官方入口
- 出版商
- Wiley-Blackwell
- 出版国家或地区
- United States
- 出版语言
- English
- ISSN
- 2365-709X
- 官网最新一期
- Volume 11, Issue 17(2026 年 9 月)
- 官方链接
- 期刊主页 ↗OpenAlex
- 投稿系统 ↗LetPub
- 专刊 / 特刊征稿 ↗出版商官网
常见问题
关于 Advanced Materials Technologies 的常见问题
Advanced Materials Technologies 是中科院几区期刊?
2025 年升级版分区表中,Advanced Materials Technologies 为材料科学 3区,小类 材料科学:综合 3 区。2026 年新锐版分区表中为材料科学 3区。不同版本与大小类分区不能混用。
Advanced Materials Technologies 的影响因子是多少?
LetPub 汇总的最新公布影响因子为 5.68,CiteScore 为 11.7,h-index 为 133。
Advanced Materials Technologies 的审稿周期多长?
按 2024年10月至2026年10月(近 24 个月)105 篇已发表文章登记的日期,投稿到接收的中位数为 119 天(四分位 82–157 天);期刊官网公布的录用率为 33%。文章统计只含被录用的稿件,出版商数据口径以官网为准,社区反馈来自投稿者样本,均不代表期刊承诺。
Advanced Materials Technologies 的投稿格式要求是什么?
据期刊作者指南:摘要:≤ 200 词;关键词:≥ 3 个;参考文献格式:著者-出版年制;稿件模板:提供 LaTeX 与 Word 模板;首次投稿格式:允许不按期刊格式排版(free format);投稿信:必须提供。以上由模型从作者指南提取并逐项与原文核对,投稿前请以官网最新版本为准。
Advanced Materials Technologies 被哪些数据库收录?
据 LetPub 与 DOAJ 记录,Advanced Materials Technologies 被 SCIE、Scopus 收录。
Advanced Materials Technologies 是开放获取期刊吗?版面费多少?
Advanced Materials Technologies 为混合开放获取。选择开放获取发表时APC 约 4,680 美元。
来源与更新
本页事实来自 LetPub、出版商官网、OpenAlex;每个数字旁标注来源与观测日期,冲突数据保留各来源原值。LetPub 原始详情页:查看 ↗(2026-08-25 归档)。最近更新:。